BACKGROUND: To investigate the potential of an Er:YAG laser for precise and traction-free removal of retinal layers in vitro. MATERIAL AND METHODS: Retinal ablation in porcine retinal explants was performed using a free running Er:YAG laser focused either into a low-OH quartz fiber or a sapphire fiber. The explants were treated under air or perfluorodecaline (PFD). The ablation depth was evaluated by optical coherence tomography (OCT) and histology sections. RESULTS: A radiant exposure of 5.0 J/cm(2) under air and PFD resulted in complete transsection of the neurosensory retina. Between 3.5 and 2.0 J/cm(2) the ablation depth and the defect patterns varied markedly and adjacent thermal zones areas were seen. Below 2.0 J/cm(2) no defects could be created in air, whereas under PFD the ablation extended into the ganglion cell layer. Ablations using a sapphire fiber and 2.0 J/cm(2) showed a significantly higher reproducibility of ablation depth, and homogeneous defect patterns limited to the nerve fiber layer could be produced without thermal damage. CONCLUSIONS: The Er:YAG laser system with a low-OH quartz fiber allowed ablation of inner retinal layers in vitro, but revealed a variable ablation depth and low reproducibility.However, a sapphire fiber showed markedly improved results. Therefore its use during vitreoretinal surgery seems possible not only as a cutting device but also as a tool for the ablation of fine retinal structures.
BACKGROUND: To investigate the potential of an Er:YAG laser for precise and traction-free removal of retinal layers in vitro. MATERIAL AND METHODS: Retinal ablation in porcine retinal explants was performed using a free running Er:YAG laser focused either into a low-OH quartz fiber or a sapphire fiber. The explants were treated under air or perfluorodecaline (PFD). The ablation depth was evaluated by optical coherence tomography (OCT) and histology sections. RESULTS: A radiant exposure of 5.0 J/cm(2) under air and PFD resulted in complete transsection of the neurosensory retina. Between 3.5 and 2.0 J/cm(2) the ablation depth and the defect patterns varied markedly and adjacent thermal zones areas were seen. Below 2.0 J/cm(2) no defects could be created in air, whereas under PFD the ablation extended into the ganglion cell layer. Ablations using a sapphire fiber and 2.0 J/cm(2) showed a significantly higher reproducibility of ablation depth, and homogeneous defect patterns limited to the nerve fiber layer could be produced without thermal damage. CONCLUSIONS: The Er:YAG laser system with a low-OH quartz fiber allowed ablation of inner retinal layers in vitro, but revealed a variable ablation depth and low reproducibility.However, a sapphire fiber showed markedly improved results. Therefore its use during vitreoretinal surgery seems possible not only as a cutting device but also as a tool for the ablation of fine retinal structures.
Authors: Thomas C Hutchens; Arash Darafsheh; Amir Fardad; Andrew N Antoszyk; Howard S Ying; Vasily N Astratov; Nathaniel M Fried Journal: J Biomed Opt Date: 2012-06 Impact factor: 3.170