A predictive tool for emissions from heavy-duty diesel vehicles.

Traditional emissions inventories for trucks and buses have relied on diesel engine emissions certification data, in units of g/bhp-hr, processed to yield a value in g/mile without a detailed accounting of the vehicle activity. Research has revealed a variety of other options for inventory prediction, including the use of emissions factors based upon instantaneous engine power and instantaneous vehicle behavior. The objective of this paper is to provide tabular factors for use with vehicle activity information to describe the instantaneous emissions from each heavy-duty vehicle considered. To produce these tables, a large body of data was obtained from the research efforts of the West Virginia University-Transportable Heavy Duty Emissions Testing Laboratories (TransLabs). These data were available as continuous records of vehicle speed (hence also acceleration), vehicle power, and emissions of carbon monoxide (CO), oxides of nitrogen (NOx), and hydrocarbons (HC). Data for particulate matter (PM) were available only as a composite value for a whole vehicle test cycle, but using a best effort approach, the PM was distributed in time in proportion to the CO. Emissions values, in g/sec, were binned according to the speed and acceleration of a vehicle, and it was shown that the emissions could be predicted with reasonable accuracy by applying this table to the original speed and acceleration data. The test cycle used was found to have a significant effect on the emissions value predicted. Tables were created for vehicles grouped by type (large transit buses, small transit buses, and tractor-trailers) and by range of model year. These model year ranges were bounded by U.S. national changes in emissions standards. The result is that a suite of tables is available for application to emissions predictions for trucks and buses with known activity, or as modeled by TRANSIMS, a vehicle activity simulation model from Los Alamos National Laboratories.