Literature DB >> 12523860

Kinetic chain lengths in highly cross-linked networks formed by the photoinitiated polymerization of divinyl monomers: a gel permeation chromatography investigation.

Jason A Burdick1, Tara M Lovestead, Kristi S Anseth.   

Abstract

Highly cross-linked networks formed by the photoinitiated polymerization of multifunctional monomers are finding application in the field of biomaterials because of their chemical versatility, reaction control, and ability to polymerize under physiological conditions. Typically, degradation is introduced into these networks via the cross-links and leads to the release of nondegradable but water-soluble kinetic chains formed during the chain polymerization process. In this study, gel permeation chromatography (GPC) was used to characterize kinetic chain length distributions in highly cross-linked systems that are being developed for orthopedic applications. By polymerizing divinyl monomers to various conversions and subsequently degrading them, we investigated the aspects of network structural evolution related to kinetic chain formation. In general, the average kinetic chain length increased with conversion until the onset of autodeceleration, when the kinetic chains decreased in length as the propagation reaction became diffusion-controlled. The distribution of kinetic chains also changed when different initiation conditions (i.e., initiator concentration and incident light intensity) were used, and a decrease in the kinetic chain lengths was observed at higher initiation rates. Finally, kinetic chain lengths were examined as a function of depth in thick samples polymerized with different light intensities and with a photobleaching initiator. Light attenuation through the sample led to different initiation rates as a function of depth and, consequently, spatial heterogeneity in the network structure as measured by the distributions of kinetic chains.

Entities:  

Mesh:

Substances:

Year:  2003        PMID: 12523860     DOI: 10.1021/bm025677o

Source DB:  PubMed          Journal:  Biomacromolecules        ISSN: 1525-7797            Impact factor:   6.988


  9 in total

1.  Effects of neighboring sulfides and pH on ester hydrolysis in thiol-acrylate photopolymers.

Authors:  Amber E Rydholm; Kristi S Anseth; Christopher N Bowman
Journal:  Acta Biomater       Date:  2007-02-01       Impact factor: 8.947

2.  Controlling the kinetic chain length of the crosslinks in photo-polymerized biodegradable networks.

Authors:  Janine Jansen; Abdul Ghaffar; Thomas N S van der Horst; George Mihov; Sjoerd van der Wal; Jan Feijen; Dirk W Grijpma
Journal:  J Mater Sci Mater Med       Date:  2013-01-31       Impact factor: 3.896

3.  Gelation chemistries for the encapsulation of nanoparticles in composite gel microparticles for lung imaging and drug delivery.

Authors:  Nathalie M Pinkerton; Stacey W Zhang; Richard L Youngblood; Dayuan Gao; Shike Li; Bryan R Benson; John Anthony; Howard A Stone; Patrick J Sinko; Robert K Prud'homme
Journal:  Biomacromolecules       Date:  2013-12-26       Impact factor: 6.988

4.  Relationship of solvent to the photopolymerization process, properties, and structure in model dentin adhesives.

Authors:  Qiang Ye; Paulette Spencer; Yong Wang; Anil Misra
Journal:  J Biomed Mater Res A       Date:  2007-02       Impact factor: 4.396

5.  Gel Permeation Chromatography Characterization of the Chain Length Distributions in Thiol-Acrylate Photopolymer Networks.

Authors:  Amber E Rydholm; Nicole L Held; Christopher N Bowman; Kristi S Anseth
Journal:  Macromolecules       Date:  2006-11-14       Impact factor: 5.985

6.  Hyaluronic acid-based hydrogels containing covalently integrated drug depots: implication for controlling inflammation in mechanically stressed tissues.

Authors:  Longxi Xiao; Zhixiang Tong; Yingchao Chen; Darrin J Pochan; Chandran R Sabanayagam; Xinqiao Jia
Journal:  Biomacromolecules       Date:  2013-10-23       Impact factor: 6.988

7.  Controlling poly(beta-amino ester) network properties through macromer branching.

Authors:  Darren M Brey; Jamie L Ifkovits; Robert I Mozia; Josh S Katz; Jason A Burdick
Journal:  Acta Biomater       Date:  2007-10-22       Impact factor: 8.947

8.  The effects of monoacrylated poly(ethylene glycol) on the properties of poly(ethylene glycol) diacrylate hydrogels used for tissue engineering.

Authors:  Jeffrey A Beamish; Junmin Zhu; Kandice Kottke-Marchant; Roger E Marchant
Journal:  J Biomed Mater Res A       Date:  2010-02       Impact factor: 4.396

Review 9.  Alginate-based hydrogels as drug delivery vehicles in cancer treatment and their applications in wound dressing and 3D bioprinting.

Authors:  Farhad Abasalizadeh; Sevil Vaghefi Moghaddam; Effat Alizadeh; Elahe Akbari; Elmira Kashani; Seyyed Mohammad Bagher Fazljou; Mohammadali Torbati; Abolfazl Akbarzadeh
Journal:  J Biol Eng       Date:  2020-03-13       Impact factor: 4.355

  9 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.