Modal decomposition method for modeling the interaction of Lamb waves with cracks.

The interaction of the low-order antisymmetric (a0) and symmetric (s0) Lamb waves with vertical cracks in aluminum plates is studied. Two types of slots are considered: (a) internal crack symmetrical with respect to the middle plane of the plate and (b) opening crack. The modal decomposition method is used to predict the reflection and transmission coefficients and also the through-thickness displacement fields on both sides of slots of various heights. The model assumes strip plates and cracks, thus considering two-dimensional plane strain conditions. However, mode conversion (a0 into s0 and vice versa) that occurs for single opening cracks is considered. The energy balance is always calculated from the reflection and transmission coefficients, in order to check the validity of the results. These coefficients together with the through-thickness displacement fields are also compared to those predicted using a finite element code widely used in the past for modeling Lamb mode diffraction problems. Experiments are also made for measuring the reflection and transmission coefficients for incident a0 or s0 lamb modes on opening cracks, and compared to the numerical predictions.