Literature DB >> 12486778

Exposures to quartz, diesel, dust, and welding fumes during heavy and highway construction.

Susan R Woskie1, Andrew Kalil, Dhimiter Bello, M Abbas Virji.   

Abstract

Personal samples for exposure to dust, diesel exhaust, quartz, and welding fume were collected on heavy and highway construction workers. The respirable, thoracic, and inhalable fractions of dust and quartz exposures were estimated from 260 personal impactor samples. Respirable quartz exposures exceeded the National Institute for Occupational Safety and Health (NIOSH) recommended exposure limit (REL) in 7-31% of cases for the trades sampled. More than 50% of the samples in the installation of drop ceilings and wall tiles and concrete finish operations exceeded the NIOSH REL for quartz. Thoracic exposures to quartz and dust exceeded respirable exposures by a factor of 4.5 and 2.8, respectively. Inhalable exposures to quartz and dust exceeded respirable exposures by a factor of 25.6 and 9.3, respectively. These findings are important due to the identification of quartz as a carcinogen by the National Toxicology Program and the International Agency for Research on Cancer. Fourteen percent of the personal samples for EC (n = 261), collected as a marker for diesel exhaust, exceeded the American Conference of Governmental Industrial Hygienists (ACGIH) threshold limit value (TLV) for diesel exhaust. Seventeen of the 22 (77%) samples taken during a partially enclosed welding operation reached or exceeded the ACGIH TLV of 5 mg/m3 for welding fume.

Entities:  

Mesh:

Substances:

Year:  2002        PMID: 12486778     DOI: 10.1080/15428110208984733

Source DB:  PubMed          Journal:  AIHA J (Fairfax, Va)        ISSN: 1542-8117


  6 in total

1.  The diesel exhaust in miners study: I. Overview of the exposure assessment process.

Authors:  Patricia A Stewart; Joseph B Coble; Roel Vermeulen; Patricia Schleiff; Aaron Blair; Jay Lubin; Michael Attfield; Debra T Silverman
Journal:  Ann Occup Hyg       Date:  2010-09-27

2.  Engineering control technologies to reduce occupational silica exposures in masonry cutting and tuckpointing.

Authors:  John D Meeker; Michael R Cooper; Daniel Lefkowitz; Pam Susi
Journal:  Public Health Rep       Date:  2009 Jul-Aug       Impact factor: 2.792

3.  Exposure assessment for roofers exposed to silica during installation of roof tiles.

Authors:  Ronald M Hall; Chandran Achutan; Ron Sollberger; Robert E McCleery; Manuel Rodriguez
Journal:  J Occup Environ Hyg       Date:  2013       Impact factor: 2.155

Review 4.  The role of ions, heavy metals, fluoride, and agrochemicals: critical evaluation of potential aetiological factors of chronic kidney disease of multifactorial origin (CKDmfo/CKDu) and recommendations for its eradication.

Authors:  Sunil J Wimalawansa
Journal:  Environ Geochem Health       Date:  2015-10-13       Impact factor: 4.609

Review 5.  Occupational exposure to diesel engine exhaust: a literature review.

Authors:  Anjoeka Pronk; Joseph Coble; Patricia A Stewart
Journal:  J Expo Sci Environ Epidemiol       Date:  2009-03-11       Impact factor: 5.563

6.  Exposure assessment of elemental carbon, polycyclic aromatic hydrocarbons and crystalline silica at the underground excavation sites for top-down construction buildings.

Authors:  Hyunhee Park; Eunsong Hwang; Miyeon Jang; Chungsik Yoon
Journal:  PLoS One       Date:  2020-09-14       Impact factor: 3.240

  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.