Assessment of the influence of use on ecotoxicological characteristics of synthetic ester lubricants.

Synthetic ester lubricants need optimisation about their technical and their ecotoxicological characteristics. To determine the ecotoxicological potential the required examinations can be based on the procedure for a risk assessment of chemicals. At present risk classification of lubricant oils is carried out with new oil fluids that are normally prepared before application in aqueous bioassays. In order to improve the ecotoxicological characteristics of some lubricant oils, the quality of the preparation method has been optimised. The resulting preparation protocol leads to aqueous extracts of the oil fluids that can be tested using biological assays. The extent of the changes of the chemical composition caused by the use as well as the ecotoxicological effects caused by additives have to be taken into consideration. For this reason various used lubricants are tested in addition to new oil fluids. In this work various lubricant samples were examined with standardised bacterial growth assays with Vibrio fischeri and Pseudomonas putida, luminescence inhibition assay with V. fischeri, survival assay with Daphnia magna and algal growth inhibition assay with Scenedesmus subspicatus. The chemical characterisation of the aqueous extracts included the determination of pH, conductivity, heavy metals, the content of dissolved organic carbon, inorganic anions and the content of phosphorus. The results emphasize the thesis that environmentally acceptable lubricants can undergo a change of their ecotoxicological potential during the use. Some of the substances that are normally added to base fluids in order to enhance the applicability of the oils may possess a high toxicological potential.