Performance of laser-ultrasonic F-SAFT imaging.

The resolution and signal-to-noise ratio of laser-ultrasonics to detect small and buried defects can be greatly enhanced by using the synthetic aperture focusing technique (SAFT). Originally developed in the time domain, SAFT can also be implemented in the frequency domain (F-SAFT) using the angular spectrum approach for a significant reduction in processing time. In this paper, an F-SAFT based data processing method especially adapted to laser-ultrasonic data is presented. This method allows for further significant improvements towards laser-ultrasonic imaging of small defects. It includes temporal deconvolution of the waveform data, control for an optimal aperture and frequency bandwidth as well as spatial interpolation of the subsurface images. All the above operations are well adapted to the frequency domain calculations and embedded in the F-SAFT data processing. Also, the aperture control and spatial interpolation allow a reduction of sampling requirements to further decrease both inspection and processing times. The above improvements are illustrated using laser-ultrasonic data taken from an aluminum sample with flat-bottom holes.