Literature DB >> 12385900

Transformation-toughened zirconia for dental inlays, crowns and bridges: chemical stability and effect of low-temperature aging on flexural strength and surface structure.

Berit I Ardlin1.   

Abstract

OBJECTIVES: One concern, for transformation-toughened zirconia (Y-TZP) is their liability to low-temperature aging with accompanying alterations of properties such as strength. The loss in strength is attributed to the transformation of tetragonal grains to monoclinic. The transformation is related to loading of the dental inlays, crowns and bridges (reconstructions), temperature and time of exposure to surrounding media (aging) and the manufacturing process of Y-TZP. The purpose of this study was to determine chemical stability and effect of aging (4% acetic acid at 80 degrees C for 168 h) on flexural strength, surface and crystalline structures of two shades, P0 and P17, of a Y-TZP ceramic used for dental reconstructions. The hypotheses to be tested were that both shades of the dental Y-TZP ceramic have high flexural strength and chemical stability compared to other dental ceramics, and that the strength, surface and crystal structures of the ceramic were not affected by aging.
METHODS: Forty specimens of Y-TZP, 20 of the shade P0 and 20 of the shade P17 were ground and polished. Ten specimens of each shade were exposed to low-temperature aging. The flexural strength of all 40 specimens was registered. Surfaces of the specimens were evaluated by using scanning electron microscopy (SEM), X-ray diffractometry and roughness recorder. The chemical solubility in 4% acetic acid was recorded by weight loss, and SEM was used to evaluate the surfaces of Y-TZP and dental feldspathic porcelain samples immersed in 8% SnF. Wilcoxon Signed Rank test was used for statistical analysis.
RESULTS: As expected, the two shades, P0 and P17, of the studied dental Y-TZP had high strengths that were not affected by aging, and high chemical stability in the tested solutions. Contrary to what was assumed the crystal and surface structures of P0 and P17 were affected. Transformation from tetragonal to monoclinic structures occurred and small elevations on the ceramic surfaces were observed after aging. SIGNIFICANCE: The transformed-toughened Y-TZP ceramic used for dental inlays, crowns and bridges has high flexural strength compared to other dental ceramics and is chemically stable. The chemical solubility is well below the limit values of ISO 6872:1995 for dental ceramics.

Entities:  

Mesh:

Substances:

Year:  2002        PMID: 12385900     DOI: 10.1016/s0109-5641(01)00095-1

Source DB:  PubMed          Journal:  Dent Mater        ISSN: 0109-5641            Impact factor:   5.304


  23 in total

1.  Early bond strength of two resin cements to Y-TZP ceramic using MPS or MPS/4-META silanes.

Authors:  Mutlu Özcan; Cenk Cura; Luiz Felipe Valandro
Journal:  Odontology       Date:  2011-01-27       Impact factor: 2.634

2.  Polishing effects and wear performance of chairside CAD/CAM materials.

Authors:  Mike Matzinger; Sebastian Hahnel; Verena Preis; Martin Rosentritt
Journal:  Clin Oral Investig       Date:  2018-05-16       Impact factor: 3.573

3.  A study on the in-vitro wear of the natural tooth structure by opposing zirconia or dental porcelain.

Authors:  Yu-Seok Jung; Jae-Whang Lee; Yeon-Jo Choi; Jin-Soo Ahn; Sang-Wan Shin; Jung-Bo Huh
Journal:  J Adv Prosthodont       Date:  2010-09-30       Impact factor: 1.904

4.  Effects of coloring procedures on shear bond strength between resin cement and colored zirconia.

Authors:  İlkin Tuncel; Işıl Turp
Journal:  Eur Oral Res       Date:  2018-09-01

5.  A comparative evaluation of shear bond strength between feldspathic porcelain and lithium di silicate ceramic layered to a zirconia core- An in vitro study.

Authors:  Aghin Moses; Lambodaran Ganesan; Sathya Shankar; Annapoorni Hariharan
Journal:  J Clin Exp Dent       Date:  2020-11-01

6.  Influence of heat treatment and veneering on the storage modulus and surface of zirconia ceramic.

Authors:  Georgius Siavikis; Michael Behr; Jef M van der Zel; Albert J Feilzer; Martin Rosentritt
Journal:  Eur J Dent       Date:  2011-04

7.  The effect of low temperature aging on the mechanical property & phase stability of Y-TZP ceramics.

Authors:  Hyung-Tae Kim; Jung-Suk Han; Jae-Ho Yang; Jai-Bong Lee; Sung-Hun Kim
Journal:  J Adv Prosthodont       Date:  2009-11-30       Impact factor: 1.904

8.  Influence of surface modification techniques on shear bond strength between different zirconia cores and veneering ceramics.

Authors:  Ramin Mosharraf; Mansour Rismanchian; Omid Savabi; Alireza Hashemi Ashtiani
Journal:  J Adv Prosthodont       Date:  2011-12-28       Impact factor: 1.904

9.  Effect of Aging on the Microstructure and Optical Properties of Translucent ZrO 2 Ceramics.

Authors:  Korina Mešić; Igor Majnarić; Ketij Mehulić
Journal:  Acta Stomatol Croat       Date:  2021-06

10.  Effects of Acid Treatment on Dental Zirconia: An In Vitro Study.

Authors:  Haifeng Xie; Shuping Shen; Mengke Qian; Feimin Zhang; Chen Chen; Franklin R Tay
Journal:  PLoS One       Date:  2015-08-24       Impact factor: 3.240

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.