Literature DB >> 12378967

Powder compaction properties of sodium starch glycolate disintegrants.

S Edge1, D F Steele, J N Staniforth, A Chen, P M Woodcock.   

Abstract

The compaction behavior of three "as supplied" commercially available grades of sodium starch glycolate (SSG), Explotab, Primojel, and Vivastar P, was investigated at compression speeds of 0.17 and 30 mm/sec. The results suggested that the three "as supplied" materials exhibit different compression and compaction behavior. Primojel and Explotab exhibited similar compactibility, whereas Vivastar P produced compacts of poor integrity. This behavior was not mirrored in the compressibility of the powders, where Vivastar P and Explotab exhibited similar performance. The materials were studied using x-ray diffraction, scanning electron microscopy, Carr's compressibility index, and swelling volume. In terms of material characteristics, all the products exhibited similar swelling in water. Primojel and Explotab retained most of the crystallographic order from the parent potato starch and exhibited comparable particle surface topographies. Vivastar P contained the lowest moisture level. However, it is not clear if the poor compactibility of Vivastar P is due to differences in moisture content, the reduced surface topography, or subtle differences in the SSG polymer structures (substitution, cross-linking, and crystallinity). Overall, even though the three commercial grades of sodium starch glycolate are successfully used as disintegrants, they do exhibit differences in their "as supplied" powder mechanical properties: Primojel and Explotab exhibit similar compactibility, whereas Vivastar P is poorly compactable but exhibits similar compressibility to Explotab. These observations may have implications when formulating poorly compactable or moisture-sensitive drugs.

Entities:  

Mesh:

Substances:

Year:  2002        PMID: 12378967     DOI: 10.1081/ddc-120006430

Source DB:  PubMed          Journal:  Drug Dev Ind Pharm        ISSN: 0363-9045            Impact factor:   3.225


  1 in total

1.  Functional assessment of four types of disintegrants and their effect on the spironolactone release properties.

Authors:  John Rojas; Santiago Guisao; Vanesa Ruge
Journal:  AAPS PharmSciTech       Date:  2012-08-17       Impact factor: 3.246

  1 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.