Preparation of agricultural residue anion exchangers and its nitrate maximum adsorption capacity.

Anion exchangers were prepared from different agricultural residues (AR) after reaction with epichlorohydrin and dimethylamine in the presence of pyridine and N,N-dimethylformamide (EDM method). Agricultural residues anion exchangers (AR-AE) produced by the EDM method were inexpensive and showed almost the same NO3- removal capacities as Amberlite IRA-900. AR-AE produced from AR with higher hemicelluloses, lignin, ash and extractive contents resulted in the lower yields. Sugarcane bagasse with the highest alpha-cellulose contents of 51.2% had the highest yield (225%) and lowest preparation cost. The highest maximum adsorption capacity (Qmax) for nitrate was obtained from rice hull (1.21 mmol g(-1)) and pine bark natural exchangers (1.06 mmol g(-1)). No correlation was found between Qmax and alpha-cellulose content in the original AR. AR-AE produced from different AR demonstrated comparable Qmax due to the removal of non-active compounds such as extractives, lignin and hemicelluloses from AR during the preparation process. Similar preparation from pure cellulose and pure alkaline lignin demonstrated that the EDM method could not produce anion exchangers from pure lignin due to its solubilization after the reaction with epichlorohydrin.