Literature DB >> 12150291

Tissue engineering of cardiac valve prostheses II: biomechanical characterization of decellularized porcine aortic heart valves.

Sotiris A Korossis1, Catherine Booth, Helen E Wilcox, Kevin G Watterson, John N Kearney, John Fisher, Eileen Ingham.   

Abstract

BACKGROUND AND AIMS OF THE STUDY: For both young patients with congenital heart disease and young, growing adults there is a need for replacement heart valves that will develop with the patient. Tissue-engineered heart valves coupled with in-vitro recellularization have this potential. One approach is to use acellular tissue matrices, but the decellularization treatment must not affect the biomechanical integrity of the valvular matrix. This study investigated the effect of 0.03% (w/v) and 0.1% (w/v) sodium dodecyl sulfate (SDS) on the mechanical integrity of porcine aortic valve leaflets.
METHODS: Left coronary porcine leaflets were treated with SDS (0.03% or 0.1%, w/v) in hypotonic or isotonic buffer and buffer alone. SDS in hypotonic buffer produced accellularity. Circumferential and radial specimens of treated leaflets were subjected to uniaxial tensile testing, and the effect of the buffer on leaflet morphology was assessed. Whole porcine aortic roots were also treated with 0.1% (w/v) SDS and subjected to function testing.
RESULTS: SDS treatment significantly increased extensibility of the leaflet specimens, which was greater in the circumferential than radial direction. This was seen as a significantly decreased slope of both the elastic and collagen phases of the stress-strain behavior. The ultimate tensile strength and transition stress were not affected significantly; nor was there any significant difference between hypotonic buffer and hypotonic buffer + SDS treatments. Study of the leaflet morphology suggested that the increased extensibility was due to shrinkage as well as to increased hydration of the treated leaflets caused by the hypotonic buffer.
CONCLUSION: SDS treatment produced a more extensible tissue with equal strength compared with the fresh aortic valve. Functionality experiments with SDS-treated whole aortic roots showed complete valve leaflet competence under physiological pressures (120 mmHg) as well as physiological leaflet kinematics.

Entities:  

Mesh:

Year:  2002        PMID: 12150291

Source DB:  PubMed          Journal:  J Heart Valve Dis        ISSN: 0966-8519


  30 in total

1.  Cardiac fibroblast-derived 3D extracellular matrix seeded with mesenchymal stem cells as a novel device to transfer cells to the ischemic myocardium.

Authors:  Eric G Schmuck; Jacob D Mulligan; Rebecca L Ertel; Nicholas A Kouris; Brenda M Ogle; Amish N Raval; Kurt W Saupe
Journal:  Cardiovasc Eng Technol       Date:  2014-03-01       Impact factor: 2.495

2.  Study on the physical properties of tissue-engineered blood vessels made by chemical cross-linking and polymer-tissue cross-linking.

Authors:  Kwangwoo Nam; Ayako Murakoshi; Tsuyoshi Kimura; Toshiya Fujisato; Soichiro Kitamura; Akio Kishida
Journal:  J Artif Organs       Date:  2009-03-29       Impact factor: 1.731

Review 3.  [Tissue engineering of heart valves].

Authors:  P Akhyari; P Minol; A Assmann; M Barth; H Kamiya; A Lichtenberg
Journal:  Chirurg       Date:  2011-04       Impact factor: 0.955

4.  Measurements of the effects of decellularization on viscoelastic properties of tissues in ovine, baboon, and human heart valves.

Authors:  Tong Jiao; Rodney J Clifton; Gabriel L Converse; Richard A Hopkins
Journal:  Tissue Eng Part A       Date:  2011-10-26       Impact factor: 3.845

5.  Development and Characterization of a Porcine Mitral Valve Scaffold for Tissue Engineering.

Authors:  M Granados; L Morticelli; S Andriopoulou; P Kalozoumis; M Pflaum; P Iablonskii; B Glasmacher; M Harder; J Hegermann; C Wrede; I Tudorache; S Cebotari; A Hilfiker; A Haverich; Sotirios Korossis
Journal:  J Cardiovasc Transl Res       Date:  2017-05-01       Impact factor: 4.132

6.  Mechanical and structural analysis of the pulmonary valve in congenital heart defects: A presentation of two case studies.

Authors:  Fatiesa Sulejmani; Anastassia Pokutta-Paskaleva; Olga Salazar; Mohsen Karimi; Wei Sun
Journal:  J Mech Behav Biomed Mater       Date:  2018-08-31

7.  Regenerative potential of low-concentration SDS-decellularized porcine aortic valved conduits in vivo.

Authors:  José Rodolfo Paniagua Gutierrez; Helen Berry; Sotirios Korossis; Saeed Mirsadraee; Sergio Veiga Lopes; Francisco da Costa; John Kearney; Kevin Watterson; John Fisher; Eileen Ingham
Journal:  Tissue Eng Part A       Date:  2014-10-01       Impact factor: 3.845

8.  Mechanical evaluation of decellularized porcine thoracic aorta.

Authors:  Yu Zou; Yanhang Zhang
Journal:  J Surg Res       Date:  2011-04-21       Impact factor: 2.192

9.  Heart valve tissue-derived hydrogels: Preparation and characterization of mitral valve chordae, aortic valve, and mitral valve gels.

Authors:  Jinglei Wu; Bryn Brazile; Sara R McMahan; Jun Liao; Yi Hong
Journal:  J Biomed Mater Res B Appl Biomater       Date:  2018-11-12       Impact factor: 3.368

10.  Form Follows Function: Advances in Trilayered Structure Replication for Aortic Heart Valve Tissue Engineering.

Authors:  Dan T Simionescu; Joseph Chen; Michael Jaeggli; Bo Wang; Jun Liao
Journal:  J Healthc Eng       Date:  2012-06       Impact factor: 2.682

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.