Literature DB >> 12099276

TGF-beta1 secretion of ROS-17/2.8 cultures on NiTi implant material.

Anita Kapanen1, Anne Kinnunen, Jorma Ryhänen, Juha Tuukkanen.   

Abstract

The biocompatibility of an orthopedic implant depends on the effect of the implant on bone-forming cells, osteoblasts. Changes in osteoblastic proliferation, maturation and differentiation are important events in ossification that enable monitoring the effect of the implant. Transforming growth factor-beta (TGF-beta) is known to suppress osteoblast proliferation and, on the other hand, to induce the maturation and differentiation of osteoblasts. Moreover, osteoblasts produce TGF-beta, which is embedded in the bone matrix and activated by bone-resorbing osteoclasts. TGF-beta inhibits osteoclastic activity. Here, we show for the first time the effect of nickel titanium shape memory metal (NiTi) on osteoblastic cytokine expression. In this study, we measured the levels of TGF-beta with enzyme-linked immunosorbent assay (ELISA) from a ROS-17/2.8 osteosarcoma cell line cultured on different metal alloy discs. ELISA results were proportioned to total DNA content of the samples. We compared NiTi, to stainless steel (Stst), pure titanium (Ti) and pure nickel (Ni). The TGF-beta1/DNA value in the NiTi group (0.0007 +/- 0.0003) was comparable with those seen in the Stst (0.0008 +/- 0.0001) and Ti (0.0007 +/- 0.0001) groups. The concentration in the Ni group was lower (0.0006 +/- 0.0003), though not statistically significantly so. In addition, the effect of surface roughness on TGF-beta1 production was studied. We compared three different grades of roughness in three differently hot-rolled alloys: NiTi. hot-rolled at 950 degrees C. Ti alloy hot-rolled at 850 degrees C (TiI) and the same Ti alloy hot-rolled at 1,050 degrees C (TiII). We found that increasing roughness of the NiTi surface increased the TGF-beta1 concentration. On the other hand, all roughness groups of TiII showed low levels of TGF-beta1. while a rough TiI surface induced similar TGF-beta1, expression as rough NiTi. Further, these same measurements made with interleukine 6 (IL-6) were found to be under the detection limit in these cultures. We conclude that a rough NiTi surface promotes TGF-beta1 expression in ROS-17/2.8 cells.

Entities:  

Mesh:

Substances:

Year:  2002        PMID: 12099276     DOI: 10.1016/s0142-9612(02)00023-6

Source DB:  PubMed          Journal:  Biomaterials        ISSN: 0142-9612            Impact factor:   12.479


  4 in total

1.  Osteoarthritic process modifies expression response to NiTi alloy presence.

Authors:  Lucie Válková; Jana Ševčíková; Monika Pávková Goldbergová; Adam Weiser; Antonín Dlouhý
Journal:  J Mater Sci Mater Med       Date:  2018-08-30       Impact factor: 3.896

Review 2.  Cytocompatibility of medical biomaterials containing nickel by osteoblasts: a systematic literature review.

Authors:  Marcin Mikulewicz; Katarzyna Chojnacka
Journal:  Biol Trace Elem Res       Date:  2010-08-12       Impact factor: 3.738

3.  Biocompatibility and Inflammatory Potential of Titanium Alloys Cultivated with Human Osteoblasts, Fibroblasts and Macrophages.

Authors:  Jana Markhoff; Martin Krogull; Christian Schulze; Christian Rotsch; Sandra Hunger; Rainer Bader
Journal:  Materials (Basel)       Date:  2017-01-10       Impact factor: 3.623

4.  TiO2 Nanotubes Alleviate Diabetes-Induced Osteogenetic Inhibition.

Authors:  Jinghong Yang; Hui Zhang; Sin Man Chan; Ruoqi Li; Yu Wu; Min Cai; Anxun Wang; Yan Wang
Journal:  Int J Nanomedicine       Date:  2020-05-18
  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.