Assessment of dermal absorption and penetration of components of a fuel mixture (JP-8).

Occupational and environmental multi-chemical exposures are extremely common. Methods for assessment of the risks from dermal exposures to complex mixtures vary depending on the information available. The composition of a volatile mixture (such as JP-8 jet fuel) can change radically, depending on the phase of the mixture - vapor, liquid or aerosol. Assessing the absorption (into the skin) and penetration (through the skin) of components of the mixture can reduce uncertainty in the risk assessment process. Permeability coefficients of the 12 individual components that could be detected to penetrate the skin could be used to assess the toxicity of each individual component in the JP-8. The penetration of each of these components is related to and can be predicted from molecular weight and octanol water partition coefficients of that component. The composition of the components that penetrate the skin would be different from the composition of JP-8 because the permeability of the components differs by two orders of magnitude. Concentrations of the aliphatic chemicals found in the skin correlated well with carbon number. The JP-8 jet fuel is used as an example of how component data on absorption and penetration can be integrated into an assessment (McDougal et al., Toxicol Sci 2000; 55: 247-255). The component approach shows promise for estimating systemic toxicity of mixtures. Local toxicity (irritation, sensitization, etc.) may be better understood in the future when quantitative information becomes available about the duration and magnitude of chemical exposures required to cause local effects.