Why biota still accumulate high levels of PCB after removal of PCB contaminated sediments in a Norwegian fjord.

Accumulation of polychlorinated biphenyls (PCBs) in blue mussels (Mytilus edulis) and semipermeable membrane devices (SPMDs) was still high after the removal of PCB contaminated sediments from a Norwegian fjord by dredging. The accumulation of low chlorinated PCB congeners with a low octanol water-partitioning coefficient (K(ow)) in blue mussels and SPMDs was higher than for the highly chlorinated congeners with a high K(ow). The accumulation of low chlorinated congeners was also higher in a lightly contaminated area compared to a highly contaminated area. That dredging the contaminated sediments was unsuccessful in lowering PCB levels in the biota may be for the following reasons: (1) Due to the low solubility of PCBs in the water it is possible that a decrease in the sediment concentration of PCB would leave the water concentrations of PCB unchanged. (2) Removal of the fine organic sediments may also play an important role, since a seabed with coarse inorganic material has a lesser ability to bind PCB. (3) The dredging may whirl up fine contaminated particles that eventually settles on the seabed producing a thin contaminated sediment layer that determine the water concentration. (4) Bioaccumulation in blue mussels and in the SPMDs occurs mostly from PCB dissolved in the water column. Since the water concentration of PCB is unchanged by the dredging, the accumulation in SPMDs and mussels is the same as before dredging. Further monitoring need to be carried out to report the long-term effect of the dredging.