In situ remediation of groundwater contaminated by heavy- and transition-metal ions by selective ion-exchange methods.

Laboratory studies were conducted to investigate the feasibility of using ion-exchange resins in permeable reactive barriers (PRBs) for the remediation of groundwater contaminated by heavy and transition metals. Ion-exchange resins represent an essentially neglected class of materials which may, in addition to iron, activated carbon, and zeolites, prove effective for use in PRBs. Four resins were considered: two commercially available resins, Duolite GT-73 (Rohm and Haas) and Amberlite IRC-748 (Rohm and Haas), and two solvent-impregnated resins (SIRs). The SIRs were prepared from Amberlite IRA-96 (Rohm and Haas) and two different thiophosphoric extractants. All four resins are able to reduce cadmium, lead, and copper concentrations from 1000 microg/L (typical for contaminated groundwaters) to below 5 microg/L. Significantly, all of the resins are effective for the capture of cadmium, copper, and lead, even in the presence of CaCl2 and clay. Because of their high hydraulic conductivity, the use of these resins in clusters of wells, as an alternative to continuous walls, is considered in the design of effective PRBs. Numerical solution of the groundwater flow equations shows that, depending on the well configuration, most (or all) of the contaminated groundwater can pass through the resins. These results demonstrate the possibility of using selective ion-exchange resins as an effective, active material in PRBs for in situ groundwater remediation.