Literature DB >> 11920659

Effect of elastin on the calcification rate of collagen-elastin matrix systems.

Anuj Singla1, Chi H Lee.   

Abstract

The role of elastin in the aortic wall calcification and involved mechanisms were investigated. The major hypothesis of this work is that elastin is one of the major components to regulate calcification of bioprosthetic heart valve (BHV). The relationship between the elastin content and the calcification rate of the aortic wall was established using collagen-elastin matrices (CEM) made of varying ratios of collagen and elastin (90 and 10, 50 and 50, and 20 and 80). Biophysical characterization of CEM was performed by water content measurement and the tensile strength test. The conformational changes of the calcifiable matrix were evaluated as a function of elastin content using Fourier transform infrared (FTIR) spectroscopy. The calcium contents in CEM implanted in the rat subcutaneous model for 7 days were measured using atomic absorption (AA) spectroscopy. As the concentration of elastin in CEM increased from 10 to 80%, the total amount of calcium accumulated in CEM also increased. The calcium level in CEM containing the collagen and an elastin ratio of 20:80 was 20.16 +/- 0.70 microg/mg compared with 1.96 +/- 0.04 microg/mg in CEM containing the collagen and an elastin ratio of 90:10. The calcification rate of CEM pretreated with ethanol increased, as the elastin concentration in the CEM. However, the calcification rate of CEM pretreated with ethanol is significantly lower than that of the untreated control. The permeation rate of ethanol through CEM with the collagen and an elastin ratio of 20:80 (0.37 +/- 0.13 mmol/cm(2)/h) is significantly smaller than that through CEM with 90:10 (0.94 +/- 0.27 mmol/cm(2)/h). These results indicate that elastin has a significant role in tissue calcification and that elastin's resistance to ethanol penetration partially contributes less effectiveness of ethanol on aortic wall calcification. Copyright 2002 Wiley Periodicals, Inc.

Entities:  

Mesh:

Substances:

Year:  2002        PMID: 11920659     DOI: 10.1002/jbm.10077

Source DB:  PubMed          Journal:  J Biomed Mater Res        ISSN: 0021-9304


  6 in total

Review 1.  Engineering biomaterials to integrate and heal: the biocompatibility paradigm shifts.

Authors:  James D Bryers; Cecilia M Giachelli; Buddy D Ratner
Journal:  Biotechnol Bioeng       Date:  2012-05-24       Impact factor: 4.530

Review 2.  Cell colonization in degradable 3D porous matrices.

Authors:  Benjamin J Lawrence; Sundararajan V Madihally
Journal:  Cell Adh Migr       Date:  2008-01-08       Impact factor: 3.405

3.  Templated biomineralization on self-assembled protein fibers.

Authors:  K Subburaman; N Pernodet; S Y Kwak; E DiMasi; S Ge; V Zaitsev; X Ba; N L Yang; M Rafailovich
Journal:  Proc Natl Acad Sci U S A       Date:  2006-09-26       Impact factor: 11.205

4.  Synthesis and Characterization of Elastin-Mimetic Hybrid Polymers with Multiblock, Alternating Molecular Architecture and Elastomeric Properties.

Authors:  Sarah E Grieshaber; Alexandra J E Farran; Sheng Lin-Gibson; Kristi L Kiick; Xinqiao Jia
Journal:  Macromolecules       Date:  2009-04       Impact factor: 5.985

Review 5.  Hybrid multicomponent hydrogels for tissue engineering.

Authors:  Xinqiao Jia; Kristi L Kiick
Journal:  Macromol Biosci       Date:  2009-02-11       Impact factor: 4.979

6.  Freeze-dried multiscale porous nanofibrous three dimensional scaffolds for bone regenerations.

Authors:  Maryam Sadat Khoramgah; Javad Ranjbari; Hojjat-Allah Abbaszadeh; Fatemeh Sadat Tabatabaei Mirakabad; Shadie Hatami; Simzar Hosseinzadeh; Hossein Ghanbarian
Journal:  Bioimpacts       Date:  2020-02-08
  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.