Effect of desensitizers on bond strength of adhesive luting agents to dentin.

The current study investigates the influence of three dentin hypersensitivity treating agents (Gluma CPS, MS Coat and Saforide) on bond strength to dentin of two luting agents (Panavia Fluoro Cement and Super-Bond C & B). Sixty bovine dentin substrates were divided into 12 combinations of four treatment conditions (Gluma CPS, MS Coat, Saforide and control) and three adhesive systems (AD Gel sodium hypochlorite + Panavia Fluoro Cement, Panavia Fluoro Cement without AD Gel and Super-Bond C & B). After bonding the treated teeth to steel rods, 24-h tensile bond strengths were determined, and average values (n=5) were compared by analysis of variance (ANOVA). Without application of the desensitizers, bond strengths of the two groups (Super-Bond C & B, 10.2 MPa; AD Gel + Panavia, 11.5 MPa) were comparable, and they were greater than the group bonded with the Panavia material with no AD Gel conditioning (7.1 MPa). Application of the Saforide ammoniated silver fluoride desensitizer reduced bond strength of both the Super-Bond and Panavia luting agents, whereas the MS Coat polymeric agent negatively affected bond strength of the Panavia cement only. The use of the Gluma desensitizer did not affect bond strength of any of the three adhesive systems, and the bond strength of the Panavia cement with the AD Gel conditioning was not reduced by application of any of the three desensitizers. The four combinations of two desensitizers (MS Coat and Gluma CPS) and two adhesive systems (Super-Bond C & B and AD Gel + Panavia) are deemed to be applicable to fixed prosthodontic treatment.