Anticoagulation management of valve replacement patients.

Anticoagulation regimens vary according to surgeon, nature of the valve (mechanical or biological), its position and other risk factors for stroke. The American College of Chest Physicians (2001) have made the following recommendations to protect patients with prosthetic heart valves from developing a stroke: (i) For mechanical heart valves: Anticoagulation with Warfarin at an INR range 2-3 for patients with a bileaflet mechanical valve in the aortic position; (ii) in the mitral position, an INR of 2.5-3.5 is recommended; an alternative recommendation is an INR of 2-3 in combination with aspirin (80 mg/day); and (iii) in patients with a mechanical valve and a history of systemic embolization, an INR of 2.5-3.5 combined with low-dose aspirin (80-100 mg) is recommended; when Warfarin therapy is initiated, the doses for patients aged <70 years is 4 mg, and for patients aged >70 years it is 3 mg. While it is important to recognize that the therapeutic range for Warfarin is narrow, recommendations have also been established to manage patients with high INRs and for the temporary discontinuation of anticoagulant therapy when they undergo surgical procedures. Rapid anticoagulation can be achieved either with unfractionated heparin or with low-molecular weight heparin (LMWH). Heparin is initiated with an intravenous bolus of 80 U/kg bodyweight, and an infusion of 18 U/kg/h. The activated thromboplastin time should be 60-80 s. An alternative to intravenous heparin is subcutaneous LMWH, which is prescribed in a mg/kg dose. In the event of valve thrombosis in patients who are hemodynamically unstable, surgical exploration with thrombectomy is indicated, with or without valve replacement. In patients who are hemodynamically stable, thrombolytic therapy is recommended initially.