Marginal gap formation of light-activated restorative materials: effects of immediate setting shrinkage and bond strength.

OBJECTIVES: The purpose of this study was to explore multiple correlations between shrinkage, bonding and marginal gap parameters, immediately after light-activation, for three classes of restorative materials. The correlations of interest were between: (a) their marginal gap formation in tooth cavities, (b) their free setting shrinkage-strain determined by two different measurement methods ((i) the marginal gap-width in a non-bonding Teflon cavity and (ii) a linear (diametral) measure of shrinkage-strain), and (c) their shear bond strengths to enamel and to dentin.
METHODS: The maximum marginal gap width and the opposing width (if any) in the tooth cavity were measured immediately (3 min) after light-activation. Two factors for the setting shrinkage-strain and the shear bond strength to enamel and to dentin were measured concomitantly.
RESULTS: Out of the set of restorative materials investigated, those that produced a smaller marginal gap in the tooth cavity had a smaller marginal gap in the Teflon cavity. There was a highly significant correlation between the two parameters (r=0.914, p<0.001). However, no relationship was observed between the marginal gap in the tooth cavity and the immediate diametral shrinkage-strain (p>0.05). Thus the restorative materials that produced a smaller marginal gap in the tooth cavity did not generally have a smaller diametral setting shrinkage-strain. Furthermore, no relationship was observed between the marginal gap in the tooth cavity and the shear bond strength to enamel or to dentin (p>0.50). SIGNIFICANCE: For light-activated restorative materials during the early stage of setting (<5 min), the free shrinkage-strain, measured by marginal-gaps in Teflon cavities, had a greater correlation with immediate marginal-gaps in tooth cavities than either the immediate diametral shrinkage-strain or the bond strengths to the tooth structure.