Hydrogen peroxide oxidation of mustard-model sulfides catalyzed by iron and manganese tetraarylporphyrines. Oxygen transfer to sulfides versus H(2)O(2) dismutation and catalyst breakdown.

Fe(III)- and Mn(III)-meso-tetraarylporphyrin catalysis of H(2)O(2) oxidation of dibenzyl and phenyl-2-chloroethyl sulfides, 1, is investigated in ethanol with the aim of designing catalytic systems for mustard decontamination. The sulfide conversion, the sulfoxide and sulfone yields, the oxygen transfer from H(2)O(2) to the sulfide, and the catalyst stability depend markedly on the metal, on the substituents of its ligand, and on the presence or the absence of a cocatalyst, imidazole or ammonium acetate. With Fe, sulfones, the only oxidation products, are readily obtained whatever the ligand (TPP, F(20)TPP, or TDCPP) and the cocatalyst; the oxygen transfer is fairly good, up to 95% when the catalyst concentration is small ([1]/[Cat] = 420); the catalyst breakdown is insignificant only in the absence of any cocatalyst. With Mn, the sulfide conversion is achieved completely when the ligand is TDCPP or TSO(3)PP, but not F(20)TPP or TPP; a mixture of sulfoxide, 2, and sulfone, 3, is always obtained with [2]/[3] = 3.5-0.85 depending on the ligand and the cocatalyst (electron withdrawing substituents favor 3 and NH(4)OAc, 2). The catalyst stability is very good, but the oxygen transfer is poor whatever the ligand and the cocatalyst. These results are discussed in terms of a scheme in which sulfide oxygenation, H(2)O(2) dismutation, and oxidative ligand breaking compete. It is shown that the efficiency of the oxygen transfer is related not only to the rate constant of the dismutation route but also to the concentration of the active metal-oxo intermediate, most likely a perferryl or permanganyl species, i.e., to the rate of its formation.