H Matsumura1, H Yanagida, N Tanoue, M Atsuta, S Shimoe. 1. Department of Fixed Prosthodontics, School of Dentistry, Nagasaki University, Nagasaki, Japan. hmatsu@net.nagasaki-u.ac.jp
Abstract
STATEMENT OF PROBLEM: Although adequate surface preparation is indispensable to achieve a consistent and durable bond between resin composite materials and the metal substructures of veneered restorations, information on the bonding performance of current metal adhesive systems is limited. PURPOSE: The purpose of this study was to evaluate the surface preparation effects of 4 metal conditioners and 1 adhesive system on bonding between a prosthetic resin composite veneering material and a gold casting alloy. MATERIAL AND METHODS: Four primers containing sulfur derivative monomer and designed for conditioning noble metal alloys (Alloy Primer, Infis Opaque Primer, Metal Primer II, and Metaltite) and a surface modification technique (Siloc) were assessed. Cast disk specimens made of gold alloy (Pontor LFC) were either primed with 1 of the 4 primers or treated with the Siloc system and bonded with a light-activated prosthetic resin composite material (New Metacolor Infis). Control specimens were also prepared without the use of a bonding agent. Shear bond strengths were determined before and after thermocycling (20,000 cycles) for evaluation of bond durability. RESULTS: All of the primed and Siloc-treated groups showed improved 24-hour shear bond strengths compared with the control group. After thermocycling, the groups either primed with the Metaltite conditioner or treated with the Siloc system exhibited the highest mean shear bond strengths. CONCLUSION: The Metaltite conditioner and Siloc system each represent a useful method for improving the bond between the gold alloy and resin composite material tested.
STATEMENT OF PROBLEM: Although adequate surface preparation is indispensable to achieve a consistent and durable bond between resin composite materials and the metal substructures of veneered restorations, information on the bonding performance of current metal adhesive systems is limited. PURPOSE: The purpose of this study was to evaluate the surface preparation effects of 4 metal conditioners and 1 adhesive system on bonding between a prosthetic resin composite veneering material and a gold casting alloy. MATERIAL AND METHODS: Four primers containing sulfur derivative monomer and designed for conditioning noble metal alloys (Alloy Primer, Infis Opaque Primer, Metal Primer II, and Metaltite) and a surface modification technique (Siloc) were assessed. Cast disk specimens made of gold alloy (Pontor LFC) were either primed with 1 of the 4 primers or treated with the Siloc system and bonded with a light-activated prosthetic resin composite material (New Metacolor Infis). Control specimens were also prepared without the use of a bonding agent. Shear bond strengths were determined before and after thermocycling (20,000 cycles) for evaluation of bond durability. RESULTS: All of the primed and Siloc-treated groups showed improved 24-hour shear bond strengths compared with the control group. After thermocycling, the groups either primed with the Metaltite conditioner or treated with the Siloc system exhibited the highest mean shear bond strengths. CONCLUSION: The Metaltite conditioner and Siloc system each represent a useful method for improving the bond between the gold alloy and resin composite material tested.