Excitation functions of 124Te(d,xn)124,125I reactions from threshold up to 14 MeV: comparative evaluation of nuclear routes for the production of 124I.

Excitation functions of the nuclear reactions 124Te(d,xn)124-125I were measured from their respective thresholds up to 14.0 MeV via the stacked-foil technique. Thin samples were prepared by electrolytic deposition of 99.8% enriched 124Te on Ti-backing. The excitation function of the 124Te(d,n)125I reaction was measured for the first time. The present data for the 124Te(d,2n)124I reaction are by an order of magnitude higher than the literature experimental data but are in good agreement with the results of a hybrid model calculation. From the measured cross sections, integral yields of 124,125I were calculated. The energy range Ed = 14 --> 10 MeV appears to be the best compromise between 124I-yield and 1251-impurity. The calculated 124I-yield amounts to 17.5 MBq/microA h and the 125I-impurity to 1.7%. A critical evaluation of the three nuclear routes for the production of 124I, viz. 124Te(d,2n)-, 124Te(p,n)- and 125Te(p,2n)-processes, is given. The reaction studied in this work proved to be least suitable. The 124Te(p,n)-reaction gives 124I of the highest radionuclidic purity, and a small-sized cyclotron is adequate for production purposes. The 125Te(p,2n)-reaction is more suitable at a medium-sized cyclotron: the yield of 124I is four times higher than in the other two reactions but the level of 0.9% 125I-impurity is relatively high.