A multi media load model for the Baltic Sea.

The background of this work is the international decision process with regard to the selection of chemicals to be assessed with priority. In order to stress the precautionary principle, mass flows were analysed rather than concentrations, threshold values, etc., as preferred by the chemical legislation (which still excludes the marine area). Lindane, hexachlorobenzene (HCB), trichloroacetic acid and its sodium salt, medium-chained chlorinated paraffins and tributyltin (TBT) were selected due to their great relevance for the marine area. Trichloroacetic acid is an interesting model compound on account of its accidental formation by degradation of volatile chlorinated hydrocarbons and during chlorination processes. In addition, a hypothetical compound was modelled, representing a highly water-soluble substance with low vapour pressure. The balancing area is the Baltic Sea and its catchment area. In order to model the substance flows, the 'Input/Output-load model' has been developed. The model quantifies the shift and the distribution of a yearly load of the substance investigated from the terrestrial-limnic into the marine compartment (Baltic Sea). Water-soluble substances, which are usually considered to be of no concern, may enter the sea in great amounts and, if not degradable, remain there. It turned out to be necessary to take into account remobilisation, unintended formation and point as well as line-sources.