Literature DB >> 11400134

Bioactive titanium: effect of sodium removal on the bone-bonding ability of bioactive titanium prepared by alkali and heat treatment.

S Fujibayashi1, T Nakamura, S Nishiguchi, J Tamura, M Uchida, H M Kim, T Kokubo.   

Abstract

As reported previously, bioactive titanium is prepared by simple alkali and heat treatment, and can bond to living bone directly. The purpose of this study was to accelerate the bioactivity of bioactive titanium in vivo. In in vitro study, sodium removal by hot water immersion enhanced the apatite-forming ability of bioactive titanium in simulated body fluid dramatically. The specific anatase structure of titania gel was effective for apatite formation in vitro. In the current study, we investigated the in vivo effect of sodium removal on the bone-bonding strength of bioactive titanium. Sodium-free bioactive titanium plates were prepared by immersion in an aqueous solution of 5 M NaOH at 60 degrees C for 24 h, followed by immersion in distilled water at 40 degrees C for 48 h before heating them at 600 degrees C for 1 h. Three kinds of titanium plates were inserted into rabbit tibiae, including untreated cp-Ti, conventional alkali- and heat-treated Ti, and sodium-free alkali- and heat-treated Ti. In vivo bioactive performance was examined mechanically and histologically after 4, 8, 16, and 24 weeks. Sodium removal enhanced the bone-bonding strength of bioactive titanium at 4 and 8 weeks postoperatively; however, its bone-bonding strength was inferior to that of conventional alkali- and heat-treated titanium at 16 and 24 weeks. Histological examinations after the detaching test revealed breakage of the treated layer in the sodium-free alkali- and heat-treated titanium group. In conclusion, sodium removal accelerated the in vivo bioactivity of bioactive titanium and achieved faster bone-bonding because of its anatase surface structure, but the loss of the surface's graded structure due to the complete removal of sodium decreased the adhesive strength of the treated layer to the titanium substrate. Further investigations are required to determine the optimum conditions for preparation of bioactive titanium. Copyright 2001 John Wiley & Sons, Inc. J Biomed Mater Res 56: 562--570, 2001

Entities:  

Mesh:

Substances:

Year:  2001        PMID: 11400134     DOI: 10.1002/1097-4636(20010915)56:4<562::aid-jbm1128>3.0.co;2-m

Source DB:  PubMed          Journal:  J Biomed Mater Res        ISSN: 0021-9304


  23 in total

1.  Fabrication of porous titanium scaffold materials by a fugitive filler method.

Authors:  T F Hong; Z X Guo; R Yang
Journal:  J Mater Sci Mater Med       Date:  2008-07-15       Impact factor: 3.896

2.  Functionalization of titanium based metallic biomaterials for implant applications.

Authors:  Rahul Bhola; Fengyun Su; Catherine E Krull
Journal:  J Mater Sci Mater Med       Date:  2011-04-08       Impact factor: 3.896

3.  Fabrication and characterization of porous Ti-7.5Mo alloy scaffolds for biomedical applications.

Authors:  Hsueh-Chuan Hsu; Shih-Kuang Hsu; Hsi-Kai Tsou; Shih-Ching Wu; Tsung-Hsuan Lai; Wen-Fu Ho
Journal:  J Mater Sci Mater Med       Date:  2013-01-13       Impact factor: 3.896

4.  Nanostructured positively charged bioactive TiO2 layer formed on Ti metal by NaOH, acid and heat treatments.

Authors:  Deepak K Pattanayak; Seiji Yamaguchi; Tomiharu Matsushita; Tadashi Kokubo
Journal:  J Mater Sci Mater Med       Date:  2011-06-14       Impact factor: 3.896

5.  In vivo study of the early bone-bonding ability of Ti meshes formed with calcium titanate via chemical treatments.

Authors:  Yi Tian; Shunsuke Fujibayashi; Seiji Yamaguchi; Tomiharu Matsushita; Tadashi Kokubo; Shuichi Matsuda
Journal:  J Mater Sci Mater Med       Date:  2015-10-29       Impact factor: 3.896

6.  A novel synthetic material for spinal fusion: a prospective clinical trial of porous bioactive titanium metal for lumbar interbody fusion.

Authors:  Shunsuke Fujibayashi; Mitsuru Takemoto; Masashi Neo; Tomiharu Matsushita; Tadashi Kokubo; Kenji Doi; Tatsuya Ito; Akira Shimizu; Takashi Nakamura
Journal:  Eur Spine J       Date:  2011-03-03       Impact factor: 3.134

7.  Is the bone-bonding ability of a cementless total hip prosthesis enhanced by alkaline and heat treatments?

Authors:  Kazutaka So; Ayumi Kaneuji; Tadami Matsumoto; Shuichi Matsuda; Haruhiko Akiyama
Journal:  Clin Orthop Relat Res       Date:  2013-12       Impact factor: 4.176

8.  Histomorphometry and stability analysis of early loaded implants with two different surface conditions in beagle dogs.

Authors:  Dong-Seok Kim; Dae-Gon Kim; Chan-Jin Park; Lee-Ra Cho
Journal:  J Adv Prosthodont       Date:  2009-03-31       Impact factor: 1.904

9.  Bone bonding ability of a chemically and thermally treated low elastic modulus Ti alloy: gum metal.

Authors:  Masashi Tanaka; Mitsuru Takemoto; Shunsuke Fujibayashi; Toshiyuki Kawai; Seiji Yamaguchi; Takashi Kizuki; Tomiharu Matsushita; Tadashi Kokubo; Takashi Nakamura; Shuichi Matsuda
Journal:  J Mater Sci Mater Med       Date:  2013-11-29       Impact factor: 3.896

10.  Effect of HCl concentrations on apatite-forming ability of NaOH-HCl- and heat-treated titanium metal.

Authors:  Deepak K Pattanayak; Takahiro Kawai; Tomiharu Matsushita; Hiroaki Takadama; Takashi Nakamura; Tadashi Kokubo
Journal:  J Mater Sci Mater Med       Date:  2009-12       Impact factor: 3.896

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.