Preparation of Nanosized Metallic Particles in Polyaniline.

The preparation of nanosized gold and palladium particles in polyaniline has been carried out via the reduction of AuCl(3) or Pd(NO(3))(2) by polyaniline in either aqueous media or N-methylpyrrolidinone (NMP). When the reduction of AuCl(3) was carried out in NMP solutions of polyaniline, the Au particles were on the order of 20 nm. The reduction of AuCl(3) or Pd(NO(3))(2) by polyaniline in the powder form in aqueous media resulted in the accumulation of the elemental Au or Pd on the surface of the polyaniline particles. Subsequent dissolution of the polyaniline in NMP resulted in metal particles of about 50 to 200 nm being dispersed in the NMP solution of polyaniline. The rate of metal salt reduction and the size of the metal particles were found to be strongly dependent on the medium used, the initial ratio of metal ions to polyaniline, and the reaction time. The polyaniline-metal particle systems were characterized using X-ray photoelectron spectroscopy, UV-visible absorption spectroscopy, and FTIR spectroscopy. Scanning and transmission electron microscopy and laser light scattering were used to determine the size of the metal particles in polyaniline. Copyright 2001 Academic Press.