Literature DB >> 11340873

Frequency dependence of dynamic curvature effects on flow through coronary arteries.

J E Moore1, E S Weydahl, A Santamarina.   

Abstract

The flow through a curved tube model of a coronary artery was investigated computationally to determine the importance of time-varying curvature on flow patterns that have been associated with the development of atherosclerosis. The entry to the tube was fixed while the radius of curvature varied sinusoidally in time at a frequency of 1 or 5 Hz. Angiographic data from other studies suggest that the radius of curvature waveform contains significant spectral content up to 6 Hz. The overall flow patterns were similar to those observed in stationary curved tubes; velocity profile skewed toward the outer wall, secondary flow patterns, etc. The effects of time-varying curvature on the changes in wall shear rate were expressed by normalizing the wall shear rate amplitude with the shear rate calculated at the static mean radius of curvature. It was found that the wall shear rate varied as much as 94 percent of the mean wall shear rate at the mid wall of curvature for a mean curvature ratio of 0.08 and a 50 percent change in radius of curvature. The effects of 5 Hz deformation were not well predicted by a quasi-static approach. The maximum values of the normalized inner wall shear rate amplitude were found to scale well with a dimensionless parameter equivalent to the product of the mean curvature ratio (delta), normalized change in radius of curvature (epsilon), and a Womersley parameter (alpha). This parameter was less successful at predicting the amplitudes elsewhere in the tube, thus additional studies are necessary. The mean wall shear rate was well predicted with a static geometry. These results indicate that dynamic curvature plays an important role in determining the inner wall shear rates in coronary arteries that are subjected to deformation levels of epsilon delta alpha > 0.05. The effects were not always predictable with a quasi-static approach. These results provide guidelines for constructing more realistic models of coronary artery flow for atherogenesis research.

Entities:  

Mesh:

Year:  2001        PMID: 11340873     DOI: 10.1115/1.1351806

Source DB:  PubMed          Journal:  J Biomech Eng        ISSN: 0148-0731            Impact factor:   2.097


  7 in total

Review 1.  Theoretical models for coronary vascular biomechanics: progress & challenges.

Authors:  Sarah L Waters; Jordi Alastruey; Daniel A Beard; Peter H M Bovendeerd; Peter F Davies; Girija Jayaraman; Oliver E Jensen; Jack Lee; Kim H Parker; Aleksander S Popel; Timothy W Secomb; Maria Siebes; Spencer J Sherwin; Rebecca J Shipley; Nicolas P Smith; Frans N van de Vosse
Journal:  Prog Biophys Mol Biol       Date:  2010-10-30       Impact factor: 3.667

2.  The effects of time varying curvature on species transport in coronary arteries.

Authors:  Maheshwaran K Kolandavel; Ernst-Torben Fruend; Steffen Ringgaard; Peter G Walker
Journal:  Ann Biomed Eng       Date:  2006-10-19       Impact factor: 3.934

3.  3D MRI-based anisotropic FSI models with cyclic bending for human coronary atherosclerotic plaque mechanical analysis.

Authors:  Dalin Tang; Chun Yang; Shunichi Kobayashi; Jie Zheng; Pamela K Woodard; Zhongzhao Teng; Kristen Billiar; Richard Bach; David N Ku
Journal:  J Biomech Eng       Date:  2009-06       Impact factor: 2.097

4.  Cyclic Bending Contributes to High Stress in a Human Coronary Atherosclerotic Plaque and Rupture Risk: In Vitro Experimental Modeling and Ex Vivo MRI-Based Computational Modeling Approach.

Authors:  Chun Yang; Dalin Tang; Shunichi Kobayashi; Jie Zheng; Pamela K Woodard; Zhongzhao Teng; Richard Bach; David N Ku
Journal:  Mol Cell Biomech       Date:  2008

5.  Mechanical response of cardiovascular stents under vascular dynamic bending.

Authors:  Jiang Xu; Jie Yang; Nan Huang; Christopher Uhl; Yihua Zhou; Yaling Liu
Journal:  Biomed Eng Online       Date:  2016-02-20       Impact factor: 2.819

6.  Influence of right coronary artery motion, flow pulsatility and non-Newtonian rheology on wall shear stress metrics.

Authors:  Pratik Kandangwa; Ryo Torii; Peter D Gatehouse; Spencer J Sherwin; Peter D Weinberg
Journal:  Front Bioeng Biotechnol       Date:  2022-08-09

7.  In silico coronary wave intensity analysis: application of an integrated one-dimensional and poromechanical model of cardiac perfusion.

Authors:  Jack Lee; David Nordsletten; Andrew Cookson; Simone Rivolo; Nicolas Smith
Journal:  Biomech Model Mechanobiol       Date:  2016-03-23
  7 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.