Literature DB >> 11323865

Properties of packable dental composites.

K K Choi1, J L Ferracane, T J Hilton, D Charlton.   

Abstract

The introduction of many new packable composites suggests that these products are rapidly gaining popularity. The purpose of this study was to evaluate the in vitro properties of a variety of packable composites and to determine if significant enhancements in physical and mechanical properties have been achieved for these materials compared with two popular nonpackable posterior composites. For the five packable and two regular composites tested (ALERT, Pyramid-Dentin, Pyramid-Enamel, Solitaire, SureFil, Heliomolar, and Z100), the values for fracture toughness, flexure strength, flexure modulus, hardness, and volumetric polymerization shrinkage were determined. In general, although the packable composites were of heavier consistency, they had mechanical properties that were intermediate to (ALERT, Pyramid, and SureFil) or lower than (Solitaire) those of the nonpackable materials. These results could have been predicted based on the similar methacrylate resin chemistry and filler volumes of the various composites. No composite had adequate depth-of-cure when tested in increments greater than 2 mm thick. Polymerization contraction of the packable composites was similar to or higher than that of the nonpackable composites. In addition, the radiopacity of at least one material, Solitaire, was not considered to be adequate (less than 2 mm of aluminum). The results of this study suggest that these packable composites are unlikely to offer improved clinical performance over well-placed nonpackable composites.

Entities:  

Mesh:

Substances:

Year:  2000        PMID: 11323865     DOI: 10.1111/j.1708-8240.2000.tb00224.x

Source DB:  PubMed          Journal:  J Esthet Dent        ISSN: 1040-1466


  11 in total

1.  Changes in surface characteristics of dental resin composites after polishing.

Authors:  Mi-Sook Choi; Yong-Keun Lee; Bum-Soon Lim; Sang-Hoon Rhee; Hyeong-Cheol Yang
Journal:  J Mater Sci Mater Med       Date:  2005-04       Impact factor: 3.896

2.  Investigations on mechanical behaviour of dental composites.

Authors:  Nicoleta Ilie; Reinhard Hickel
Journal:  Clin Oral Investig       Date:  2009-02-26       Impact factor: 3.573

3.  Three-year results of a randomized controlled clinical trial of the posterior composite QuiXfil in class I and II cavities.

Authors:  Juergen Manhart; Hong-Yan Chen; Reinhard Hickel
Journal:  Clin Oral Investig       Date:  2008-11-08       Impact factor: 3.573

4.  Microhardness and polymerization shrinkage of flowable resins that are light cured using a blue laser.

Authors:  Chang-Mo Jeong; Young-Joon Heo; Young-Chan Jeon; Hyung-Il Kim; Yong Hoon Kwon
Journal:  Lasers Med Sci       Date:  2011-07-24       Impact factor: 3.161

5.  Radiopacity of dental restorative materials.

Authors:  Tomaž Hitij; Aleš Fidler
Journal:  Clin Oral Investig       Date:  2012-07-24       Impact factor: 3.573

6.  In vitro investigation of the performance of different restorative materials under cast circumferential clasps for removable dental prostheses.

Authors:  Peter Pospiech; Florian Nagel; Florian Gebhart; Frank P Nothdurft; Gergo Mitov
Journal:  Clin Oral Investig       Date:  2011-12-17       Impact factor: 3.573

7.  Effect of filler size and temperature on packing stress and viscosity of resin-composites.

Authors:  Haitham Elbishari; Julian Satterthwaite; Nick Silikas
Journal:  Int J Mol Sci       Date:  2011-08-18       Impact factor: 5.923

8.  Effects of air-polishing powders on color stability of composite resins.

Authors:  Ahmet Umut Güler; Ibrahim Duran; Ali Çağin Yücel; Pelin Ozkan
Journal:  J Appl Oral Sci       Date:  2011-07-22       Impact factor: 2.698

9.  Assessment of Microleakage in Class II Cavities having Gingival Wall in Cementum using Three Different Posterior Composites.

Authors:  Vanamala Narayana; Srirekha Ashwathanarayana; Gururaj Nadig; Sushma Rudraswamy; Nagabhushana Doggalli; S Vijai
Journal:  J Int Oral Health       Date:  2014-07

10.  Effects of polishing procedures on color stability of composite resins.

Authors:  Ahmet Umut Güler; Eda Güler; Ali Cağin Yücel; Ertan Ertaş
Journal:  J Appl Oral Sci       Date:  2009 Mar-Apr       Impact factor: 2.698

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.