Literature DB >> 11314071

BoneSource solidification: a comparison between water and sodium phosphate as the solvent.

C M Barone1, D F Jimenez, M T Boschert, B W Beckert.   

Abstract

The purpose of this study was to determine the solidification rates for BoneSource (hydroxyapatite cement) mixed with sterile water versus BoneSource mixed with 0.25 ml of sodium phosphate. The average time for cure for BoneSource mixed with sterile water was 99 minutes, with a SD of 5.3 minutes. The average time for cure for BoneSource and sodium phosphate was 43 minutes, with a SD of 3.6 minutes (P < 0.0003). The average temperature for BoneSource in sterile water was 19.1 degrees C with a SD of 0.082, and the average temperature of BoneSource in sodium phosphate was 20.1 degrees C, with a SD of 0.1. Therefore, sodium phosphate shows that there is a significantly decreased amount of time required to solidify BoneSource and it remains isothermic throughout this reaction.

Entities:  

Mesh:

Substances:

Year:  2000        PMID: 11314071     DOI: 10.1097/00001665-200011050-00010

Source DB:  PubMed          Journal:  J Craniofac Surg        ISSN: 1049-2275            Impact factor:   1.046


  3 in total

1.  [Influence of different mixing fluids on mechanical and micromorphological in vitro qualities of hydroxyapatite cement].

Authors:  A Nitsch; A Patyk; P Schwartz; H-A Merten
Journal:  Mund Kiefer Gesichtschir       Date:  2005-03

2.  Optimisation of the mechanical and handling properties of an injectable calcium phosphate cement.

Authors:  R M O'Hara; N J Dunne; J F Orr; F J Buchanan; R K Wilcox; D C Barton
Journal:  J Mater Sci Mater Med       Date:  2010-01-22       Impact factor: 3.896

3.  Frontal bone remodeling for gender reassignment of the male forehead: a gender-reassignment surgery.

Authors:  Johannes Franz Hoenig
Journal:  Aesthetic Plast Surg       Date:  2011-05-15       Impact factor: 2.326

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.