[Total trapezometacarpal prostheses: concepts and classification study].

This paper is an attempt to classify the different types of trapezio-metacarpal total prostheses according to their bio-mechanical principle and to compare the bio-mechanics of these prostheses to that of the normal trapeziometacarpal joint. The trapeziometacarpal joint has two approximate centres of rotation (one in the proximal metacarpal, one in the trapezium), two degrees of freedom and two arc of mobility about 70 degrees. The mechanical model of the trapeziometacarpal joint is a universal-joint called "cardan" with three constraint forces (one axial compression force, and two shear forces, radial and posterior) and one constraint moment around the longitudinal axis. The trapeziometacarpal prostheses may be classified in two main categories: the most frequently used are the "ball and socket" prostheses. Several prostheses, including the surface replacement prostheses have the mechanical characteristics of an universal joint (cardan). Ball and socket prostheses have one centre of rotation, 3 degrees of freedom, three constraint forces in three directions and no constraint moment when "cardan" or surface prostheses have two centres of rotation and 2 degrees of freedom; three constraint forces and one constraint moment. Trapeziometacarpal prostheses may also be classified according to their arc of mobility, or according to their mode of primary fixation (cemented, non-cemented), "press-fit", expansion and to their secondary fixation (hydroxyapatite).