Regeneration of surfactant-modified zeolite after saturation with chromate and perchloroethylene.

Surfactant-modified zeolites (SMZ) have drawn recent attention as sorbents due to their removal of multiple types of contaminants and low material cost. However, like most sorbents, SMZ has a finite sorption capacity for different contaminants. The potential applications, economics, and efficiency of SMZ as a sorbent are related to the ability to regenerate the material. This paper reports several methods to regenerate chromate- and perchloroethylene-saturated SMZ. Regeneration of chromate-saturated SMZ was achieved by flushing with a sodium carbonate/sodium hydroxide solution. However, this high-pH solution increased the counterion competition for chromate sorption sites and decreased the chromate sorption capacity of the regenerated SMZ. As an alternative regeneration method, chromate sorbed to SMZ was reduced to Cr(III) in situ using sodium dithionite solution. Although reduction with dithionite restored the chromate sorption maximum, the chromate sorption intensity was lowered, possibly due to the competition by sulfate (generated from oxidation of dithionite) for chromate sorption sites. Carbonate-regenerated SMZ showed no loss of sorption affinity for perchloroethylene (PCE) compared to virgin SMZ. Air sparging of PCE-saturated SMZ fully regenerated the SMZ. The results show that it is possible to regenerate and re-use SMZ following saturation with anionic or nonpolar organic contaminants.