Literature DB >> 11245902

Versatility of biodegradable biopolymers: degradability and an in vivo application.

V Hasirci1, K Lewandrowski, J D Gresser, D L Wise, D J Trantolo.   

Abstract

Biodegradable materials have various important applications in the biomedical field. There are basically two groups of polyesters which have significant importance in this field. These are polylactides and polyhydroxybutyrates. Both groups degrade via hydrolysis with the rates of degradation depending on medium properties such as pH, temperature, solvent and presence of biocatalysts, as well as on chemical compositions. In order for these biomaterials to be suitable for use in load bearing applications without deformation or warping their strengths and their capability to maintain their form must be improved. To insure dimensional stability during degradation and to match modulus and strength to that of bone, introduction of a reinforcing structure for those applications to plate fixation through the creation of an interpenetrating network might be a feasible approach. In this study, poly(lactide-co-glycolide) (PLGA), was the major structural element to be strengthened by a three-dimensional network or "scaffold" of another biodegradable polymer, poly(propylene fumarate) (PPF). PPF would be crosslinked with a biocompatible vinyl monomer, vinylpyrrolidone (VP). Three different approaches were tested to create dimensionally stable bone plates. First, via in situ crosslinking of PPF in the presence of PLGA. Secondly, by blending of precrosslinked PPF with PLGA. Finally, by simultaneous crosslinking and molding of the PLGA, PPF and VP. These were compared against extruded or compression molded PLGA controls. Results showed that compression molding at room temperature followed by crosslinking under pressure at elevated temperature and subsequently by gamma-irradiation appeared to yield the most favorable product as judged by swelling, hardness and flexural strength data. The composition of the implant material, PLGA(3):PPF(1):VP(0.7), appeared to be suitable and formed the compositional and procedural basis for in vivo biocompatibility studies.

Entities:  

Mesh:

Substances:

Year:  2001        PMID: 11245902     DOI: 10.1016/s0168-1656(00)00409-0

Source DB:  PubMed          Journal:  J Biotechnol        ISSN: 0168-1656            Impact factor:   3.307


  11 in total

1.  Will the hold of solid biodegradable implants be influenced by swelling during the degradation process? An in-vitro study with Meniscus Arrows.

Authors:  Diederick B Wouters; Rudolf R M Bos; Jeff T De Hosson
Journal:  Knee Surg Sports Traumatol Arthrosc       Date:  2007-06-23       Impact factor: 4.342

Review 2.  Bioresorbable polymers: heading for a new generation of spinal cages.

Authors:  P I J M Wuisman; T H Smit
Journal:  Eur Spine J       Date:  2005-11-15       Impact factor: 3.134

3.  Functionalizing electrospun fibers with biologically relevant macromolecules.

Authors:  Cheryl L Casper; Nori Yamaguchi; Kristi L Kiick; John F Rabolt
Journal:  Biomacromolecules       Date:  2005 Jul-Aug       Impact factor: 6.988

4.  Supramolecular hydrogelators of N-terminated dipeptides selectively inhibit cancer cells.

Authors:  Yi Kuang; Yuan Gao; Bing Xu
Journal:  Chem Commun (Camb)       Date:  2011-10-31       Impact factor: 6.222

5.  Local delivery of FTY720 accelerates cranial allograft incorporation and bone formation.

Authors:  Cynthia Huang; Anusuya Das; Daniel Barker; Sunil Tholpady; Tiffany Wang; Quanjun Cui; Roy Ogle; Edward Botchwey
Journal:  Cell Tissue Res       Date:  2011-08-24       Impact factor: 5.249

6.  The visualisation of vitreous using surface modified poly(lactic-co-glycolic acid) microparticles.

Authors:  David Y S Chau; Naing L Tint; Russell J Collighan; Martin Griffin; Harminder S Dua; Kevin M Shakesheff; Felicity R A J Rose
Journal:  Br J Ophthalmol       Date:  2010-05       Impact factor: 4.638

7.  The microscopical characterization of membranes poly (L-glycolic-co-lactic acid) with and without added plasticizer: an in vivo study.

Authors:  Luciana Pietro; Débora R M Silva; Maria do Carmo Alberto-Rincon; E A R Duek
Journal:  J Mater Sci Mater Med       Date:  2007-08-15       Impact factor: 3.896

8.  Mechanistic studies of Gemcitabine-loaded nanoplatforms in resistant pancreatic cancer cells.

Authors:  Anne-Laure Papa; Sudipta Basu; Poulomi Sengupta; Deboshri Banerjee; Shiladitya Sengupta; Rania Harfouche
Journal:  BMC Cancer       Date:  2012-09-22       Impact factor: 4.430

9.  Hydrogel-elastomer composite biomaterials: 1. Preparation of interpenetrating polymer networks and in vitro characterization of swelling stability and mechanical properties.

Authors:  Henry T Peng; Lucie Martineau; Pang N Shek
Journal:  J Mater Sci Mater Med       Date:  2007-01-23       Impact factor: 4.727

10.  Fabrication and characterization of novel multilayered structures by stereocomplexion of poly(D-lactic acid)/poly(L-lactic acid) and self-assembly of polyelectrolytes.

Authors:  Elena Dellacasa; Li Zhao; Gesheng Yang; Laura Pastorino; Gleb B Sukhorukov
Journal:  Beilstein J Nanotechnol       Date:  2016-01-21       Impact factor: 3.649

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.