Transport of Escherichia coli in sand columns with constant and changing water contents.

Understanding how changes in volumetric water content (theta) affect bacterial adsorption could help reduce transport of pathogenic and indicator bacteria that may be present in infiltrating wastewater. Three flow regimes that simulated infiltration from a household septic system were evaluated: saturated, unsaturated with a constant volumetric water content theta (constant unsaturated flow), and unsaturated with cyclic changes in theta (variable unsaturated flow). Escherichia coli was suspended in artificial sewage (AS) and applied as step inputs to sand columns, with regular interruptions in input for variable unsaturated flow. A transport model was fit to the saturated and constant unsaturated flow breakthrough curves to determine retardation (R), the first-order filtration coefficient (mu), and the maximum outflow relative concentration (Cmax). The total cells transported as a fraction of input (tau) in all three flow regimes was calculated. Constant unsaturated flow resulted in a significantly lower Cmax (0.633) in comparison with saturated flow (0.803, P < or = 0.05), although unsaturated mu (0.0693 h(-1)) was not significantly different from saturated mu (0.0259 h(-1)). Constant unsaturated flow also resulted in a significantly smaller tau (0.617) than saturated (0.806) or variable unsaturated flow (0.734). In variable unsaturated flow, cell concentrations were out of phase with theta--as the column drained, cell concentrations in the outflow increased; and when a pulse of suspension was applied, cell concentrations decreased. Constant unsaturated flow is probably the best for removal of pathogenic bacteria because this regime resulted in lower maximum concentrations of E. coli and greater cell removal, in comparison with saturated and variable unsaturated flow.