Literature DB >> 11162039

Novel synthetic selectively degradable vascular prostheses: a preliminary implantation study.

U Izhar1, H Schwalb, J B Borman, G R Hellener, A Hotoveli-Salomon, G Marom, T Stern, D Cohn.   

Abstract

BACKGROUND: Vascular grafts perform less well than autologous arterial or vein grafts. The purpose of this study was to evaluate the short-term performance of selectively biodegradable filament-wound vascular prostheses, comprising elastomeric poly(ether urethane) (Lycra) scaffolds and flexible, hydrophilic biodegradable coatings.
MATERIALS AND METHODS: Two types of selectively biodegradable vascular grafts were manufactured, comprising a filament-wound Lycra scaffold, subsequently coated with a biodegradable poly(ethylene glycol)/poly(lactic acid) (PELA) block copolymer. The two types of grafts differed in both the overall porosity of the scaffold and the hydrophilicity of the biodegradable constituent. A 60-mm-long and 6-mm-diameter filament-wound and polytetrafluoroethylene (ePTFE) grafts were implanted as interposition prostheses, randomly, at the right- and left-side carotid arteries.
RESULTS: Implantation studies proved the grafts to be patent and pulsatile for periods of up to 3 months. Increasing the scaffold porosity and enhancing the hydrophilicity of the biodegradable component improved both the transmural tissue ingrowth process and the vascularization of the prosthesis wall. Also, a well-adhered peripheral tissue and a thin, uniform intima and endothelial lining were obtained. All ePTFE graft controls, although patent, were rather stiff and nonpulsatile. A thick pseudointima, poorly attached to the prosthesis inner surface, was observed. The compliance of the wet grafts was significantly higher than in the dry state, stemming mainly from the water-plasticizing effect on the biodegradable component. The grafts explanted after a period of 6 weeks exhibited compliance only slightly lower than that of the wet grafts. After 12 weeks, however, the hoop compliance was 20% lower than that prior to implantation. At 100 mm Hg, for example, the original compliance of the wet graft was 2.5%/100 mm Hg decreasing to 2.0%/100 mm Hg after a 3-month implantation. The compliance reduction with implantation is attributed to the ingrowth of the perigraft tissue as revealed by the histological study. A compliance of 2.0%/100 mm Hg is slightly better than that of a standard PTFE graft with an original compliance of 1.6%/100 mm Hg. Yet it is still an order of magnitude smaller than that of a canine carotid artery.
CONCLUSIONS: The improved mechanical properties and enhanced healing of the highly porous filament-wound Lycra scaffold graft coated with hydrophilic biodegradable PELA has the potential of being a highly effective small caliber prosthetic graft. Copyright 2000 Academic Press.

Entities:  

Mesh:

Substances:

Year:  2001        PMID: 11162039     DOI: 10.1006/jsre.2000.6042

Source DB:  PubMed          Journal:  J Surg Res        ISSN: 0022-4804            Impact factor:   2.192


  6 in total

Review 1.  Biomaterials for vascular tissue engineering.

Authors:  Swathi Ravi; Elliot L Chaikof
Journal:  Regen Med       Date:  2010-01       Impact factor: 3.806

Review 2.  Polymeric materials for tissue engineering of arterial substitutes.

Authors:  Swathi Ravi; Zheng Qu; Elliot L Chaikof
Journal:  Vascular       Date:  2009 May-Jun       Impact factor: 1.285

3.  Catalyst-free synthesis of high elongation degradable polyurethanes containing varying ratios of isosorbide and polycaprolactone: physical properties and biocompatibility.

Authors:  Hyung-seok Park; Myoung-Seon Gong; Jonathan C Knowles
Journal:  J Mater Sci Mater Med       Date:  2012-11-27       Impact factor: 3.896

4.  Novel reinforcement of corrugated nanofiber tissue-engineered vascular graft to prevent aneurysm formation for arteriovenous shunts in an ovine model.

Authors:  Hiroshi Matsushita; Hidenori Hayashi; Katherine Nurminsky; Tyler Dunn; Yusheng He; Isaree Pitaktong; Yojiro Koda; Shanxiu Xu; Vivian Nguyen; Takahiro Inoue; Daniel Rodgers; Kevin Nelson; Jed Johnson; Narutoshi Hibino
Journal:  JVS Vasc Sci       Date:  2022-02-22

5.  Synthesis of highly elastic biocompatible polyurethanes based on bio-based isosorbide and poly(tetramethylene glycol) and their properties.

Authors:  Hyo-Jin Kim; Min-Sil Kang; Jonathan C Knowles; Myoung-Seon Gong
Journal:  J Biomater Appl       Date:  2014-05-07       Impact factor: 2.646

6.  Application of high-strength biodegradable polyurethanes containing different ratios of biobased isomannide and poly (ϵ-caprolactone) diol.

Authors:  Dong-In Lim; Hyung-Seok Park; Jeong-Hui Park; Jonathan C Knowles; Myoung-Seon Gong
Journal:  J Bioact Compat Polym       Date:  2013-05       Impact factor: 1.756

  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.