An HPLC method with UV detection, pH control, and reductive ascorbic acid for cyanuric acid analysis in water.

Every year over 250 million pounds of cyanuric acid (CA) and chlorinated isocyanurates are produced industrially. These compounds are standard ingredients in formulations for household bleaches, industrial cleansers, dishwasher compounds, general sanitizers, and chlorine stabilizers. The method developed for CA using high-performance liquid chromatography (HPLC) with UV detection simplifies and optimizes certain parameters of previous methodologies by effective pH control of the eluent (95% phosphate buffer: 5% methanol, v/v) to the narrow pH range of 7.2-7.4. UV detection was set at the optimum wavelength of 213 nm where the cyanuric ion absorbs strongly. Analysis at the lower pH range of 6.8-7.1 proved inadequate due to CA keto-enol tautomerism, while at pHs of <6.8 there were substantial losses in analytical sensitivity. In contrast, pHs of >7.4 proved more sensitive but their use was rejected because of CA elution at the chromatographic void volume and due to chemical interferences. The complex equilibria of chlorinated isocyanurates and associated species were suppressed by using reductive ascorbic acid to restrict the products to CA. UV, HPLC-UV, and electrospray ionization mass spectrometry techniques were combined to monitor the reactive chlorinated isocyanurates and to support the use of ascorbic acid. The resulting method is reproducible and measures CA in the 0.5-125 mg/L linear concentration range with a method detection limit of 0.05 mg/L in water.