Rapid and complete extraction of phenols from olive oil and determination by means of a coulometric electrode array system.

Extraction methods to determine olive oil phenols are not exhaustive. A procedure to test their effectiveness, based on the treatment of the extracted oil with 2 N HCl followed by analysis of phenols in the aqueous phase, has been developed. It was concluded, using this test, that 15-40% of phenols remained unextracted when the liquid/liquid extraction method with 80% methanol was applied. Solid phase extraction (C(18) cartridge) succeeded in retaining most of the phenols in the cartridge, but the recovery yield from the sorbent material was low. However, a new extraction method, based on the use of N,N-dimethylformamide (DMF) as an extraction solvent, achieved a complete extraction of phenols from oils. The proposed method requires a lower amount of oil, solvents, energy, and labor than the traditional ones. Because of the low concentration of phenols in the DMF extract, the highly sensitive electrochemical detector (EC) technique was studied. All of the phenols detected by the traditional UV detectors were also detected by EC using a coulometric array system. A rapid and complete analytical methodology of phenols in olive oil has been proposed based on coupling DMF extraction and EC detection.