PURPOSE: To evaluate the results of a modified self-sealing incision for achieving astigmatic neutrality in cataract surgery requiring a 6.0 to 7.0 mm incision as well as the methods of correcting preexisting astigmatism using these incisions. SETTING: Department of Ophthalmology, Kushimoto Rehabilitation Center, Kushimoto, Japan. METHODS: To achieve astigmatic neutrality, a frown-shaped, oblique incision-the BENT (between 9 and 12 o'clock) frown-was used. To reduce preexisting against-the-rule or with-the-rule astigmatism, the incisions were placed on the temporal or superior steep astigmatic axis, respectively. A frown incision was used when aiming for mild astigmatic reduction and an arcuate incision when aiming for relatively large astigmatic reduction. RESULTS: In the 6.0 to 7.0 mm BENT frown incision group, mean flattening was minimal throughout 6 months of follow-up, with a maximum of 0.18 diopter (D) 1 week postoperatively. Surgically induced astigmatism was less than that with other incisions. Ninety-four percent of cases had a difference in absolute astigmatism of less than 0.50 D between preoperatively and 6 months postoperatively. Relatively large flattening was observed in eyes with 6.0 to 7.0 mm steep-axis incisions of superior arcuate, temporal arcuate, superior frown, and temporal frown, with means of 1.03, 0.79, 0.64, and 0.52 D, respectively, at 6 months. Ninety-eight percent of cases had a reduction in preexisting absolute astigmatism postoperatively. CONCLUSIONS: In cataract surgery using relatively large scleral self-sealing incisions, the BENT frown incision effectively achieved astigmatic neutrality. The incisions on the temporal or superior steep astigmatic axis (with selective shape) reduced astigmatism in almost all cases.
PURPOSE: To evaluate the results of a modified self-sealing incision for achieving astigmatic neutrality in cataract surgery requiring a 6.0 to 7.0 mm incision as well as the methods of correcting preexisting astigmatism using these incisions. SETTING: Department of Ophthalmology, Kushimoto Rehabilitation Center, Kushimoto, Japan. METHODS: To achieve astigmatic neutrality, a frown-shaped, oblique incision-the BENT (between 9 and 12 o'clock) frown-was used. To reduce preexisting against-the-rule or with-the-rule astigmatism, the incisions were placed on the temporal or superior steep astigmatic axis, respectively. A frown incision was used when aiming for mild astigmatic reduction and an arcuate incision when aiming for relatively large astigmatic reduction. RESULTS: In the 6.0 to 7.0 mm BENT frown incision group, mean flattening was minimal throughout 6 months of follow-up, with a maximum of 0.18 diopter (D) 1 week postoperatively. Surgically induced astigmatism was less than that with other incisions. Ninety-four percent of cases had a difference in absolute astigmatism of less than 0.50 D between preoperatively and 6 months postoperatively. Relatively large flattening was observed in eyes with 6.0 to 7.0 mm steep-axis incisions of superior arcuate, temporal arcuate, superior frown, and temporal frown, with means of 1.03, 0.79, 0.64, and 0.52 D, respectively, at 6 months. Ninety-eight percent of cases had a reduction in preexisting absolute astigmatism postoperatively. CONCLUSIONS: In cataract surgery using relatively large scleral self-sealing incisions, the BENT frown incision effectively achieved astigmatic neutrality. The incisions on the temporal or superior steep astigmatic axis (with selective shape) reduced astigmatism in almost all cases.