Method for collecting naturally occurring airborne bacterial spores for determining their thermal resistance.

The ability to determine the thermal resistance of naturally occurring airborne bacterial spores associated with spacecraft and their assembly areas has been hindered by lack of an effective collecting system. Efforts to collect and concentrate spores with air samplers or from air filters have not been successful. A fallout method was developed for this purpose and tested. Sterile Teflon ribbons (7.6 by 183 cm) were exposed in pertinent spacecraft assembly areas and subsequently treated with dry heat. Thermal inactivation experiments were conducted at 125 and 113 C. Heating intervals ranged from 1 to 12 h at 125 C and 6, 12, 18, and 24 h at 113 C. Eight hours was the longest heating time yielding survivors at 125 C, whereas survivors were recovered at all of the heating intervals at 113 C. D125C values were calculated using the fractional-replicate-unit-negative technique of Pflug and Schmidt (1968) and ranged from 25 to 126 min. This variation indicated that the most probable number of survivors at each heating interval did not fall on a straight line passing through the initial spore population. However, the most-probable-number values taken alone formed a straight line suggesting logarithmic thermal destruction of a subpopulation of spores with a D125C value of 6.3 h.