In situ derivatization/solid-phase microextraction for the determination of haloacetic acids in water

An in situ derivatization solid-phase microextraction method has been developed for the determination of haloacetic acids (HAAs) in water. The analytical procedure involves derivatization of HAAs to their methyl esters with dimethyl sulfate, headspace sampling using solid-phase microextraction (SPME), and gas chromatography-ion trap mass spectrometry (GC/ITMS) determination. Parameters affecting both derivatization efficiency and head-space SPME procedure, such as the selection of the SPME coating, derivatization-extraction time and temperature, and ionic strength, were optimized. The commercially available Carboxen-poly(dimethylsiloxane) (CAR-PDMS) fiber appears to be the most suitable for the determination of HAAs. Moreover, the formation of HAA methyl esters was dramatically improved (up to 90-fold) by the addition of tetrabutylammonium hydrogen sulfate (4.7 micromol) to the sample as ion-pairing agent in the derivatization step. The precision of the in situ derivatization/HS-SPME/GC/ITMS method evaluated using an internal standard gave relative standard deviations (RSDs) between 6.3 and 11.4%. The method was linear over 2 orders of magnitude, and detection limits were compound-dependent, but ranged from 10 to 450 ng/L. The method was compared with the EPA method 552.2 for the analysis of HAAs in various water samples, and good agreement was obtained. Consequently, in situ derivatization/HS-SPME/GC/ITMS is proposed for the analysis of HAAs in water.