Literature DB >> 11044853

Changes in the mechanical properties and surface texture of compomer immersed in various media.

N Abu-Bakr1, L Han, A Okamoto, M Iwaku.   

Abstract

STATEMENT OF PROBLEM: Limited information is available about the mechanical behavior of compomer under intraoral conditions.
PURPOSE: This in vitro study evaluated changes in the mechanical properties and surface texture of compomer and other materials, used in similar clinical circumstances, when immersed in various media.
MATERIAL AND METHODS: Hardness measurement for 5 tested materials and 4 immersion media was obtained with a Vickers hardness testing machine. Compressive strength was measured using an Autograph at a crosshead speed of 0.75 mm/min. All readings were taken for up to a 60-day period. An electron probe microanalyzer was used to give an SEM image.
RESULTS: The average compressive strength and Vickers surface hardness showed a significant difference between materials. Results showed an overall increase in the solubility of specimens immersed in low pH soft drinks.
CONCLUSION: There was a difference in the mechanical properties and surface texture of the materials tested in this study when they were immersed in various media.

Entities:  

Mesh:

Substances:

Year:  2000        PMID: 11044853     DOI: 10.1067/mpr.2000.109635

Source DB:  PubMed          Journal:  J Prosthet Dent        ISSN: 0022-3913            Impact factor:   3.426


  15 in total

1.  To Analyse the Erosive Potential of Commercially Available Drinks on Dental Enamel and Various Tooth Coloured Restorative Materials - An In-vitro Study.

Authors:  Babita Karda; Ritu Jindal; Sandeep Mahajan; Sanam Sandhu; Sunila Sharma; Rajwinder Kaur
Journal:  J Clin Diagn Res       Date:  2016-05-01

2.  Effect of Soft Drinks and Fresh Fruit Juice on Surface Roughness of Commonly used Restorative Materials.

Authors:  Prabhadevi Maganur; V Satish; A R Prabhakar; Srinivas Namineni
Journal:  Int J Clin Pediatr Dent       Date:  2015-04-28

3.  Erosive potential of cola and orange fruit juice on tooth colored restorative materials.

Authors:  K Rajavardhan; Ajs Sankar; Mgm Kumar; Kr Kumar; K Pranitha; Kk Kishore
Journal:  Ann Med Health Sci Res       Date:  2014-09

4.  Influence of citric acid on the surface texture of glass ionomer restorative materials.

Authors:  Dappili Swami Ranga Reddy; Ramachandran Anil Kumar; Sokkalingam Mothilal Venkatesan; Gopal Shankar Narayan; Dasarathan Duraivel; Rajamani Indra
Journal:  J Conserv Dent       Date:  2014-09

5.  Effect of different bleaching strategies on microhardness of a silorane-based composite resin.

Authors:  Mahmoud Bahari; Siavash Savadi Oskoee; Narmin Mohammadi; Mohammad Esmaeel Ebrahimi Chaharom; Mostafa Godrati; Ayda Savadi Oskoee
Journal:  J Dent Res Dent Clin Dent Prospects       Date:  2016-12-21

6.  Effect of water storage on fluoride release and mechanical properties of a polyacid-modified composite resin (compomer).

Authors:  Ibrahimm M Hammouda; Essam E Al-Wakeel
Journal:  J Biomed Res       Date:  2011-07

7.  Surface hardness evaluation of different composite resin materials: influence of sports and energy drinks immersion after a short-term period.

Authors:  Ugur Erdemir; Esra Yildiz; Meltem Mert Eren; Sevda Ozel
Journal:  J Appl Oral Sci       Date:  2013 Mar-Apr       Impact factor: 2.698

8.  Does the temperature of beverages affect the surface roughness, hardness, and color stability of a composite resin?

Authors:  Duygu Tuncer; Emel Karaman; Esra Firat
Journal:  Eur J Dent       Date:  2013-04

9.  Initial sliding wear kinetics of two types of glass ionomer cement: a tribological study.

Authors:  Cyril Villat; Pierre Ponthiaux; Nelly Pradelle-Plasse; Brigitte Grosgogeat; Pierre Colon
Journal:  Biomed Res Int       Date:  2014-06-29       Impact factor: 3.411

10.  Comparison of the Effects of Two Different Drinks on Microhardness of a Silorane-based Composite Resin.

Authors:  Sedighe Sadat HashemiKamangar; Maryam Ghavam; Zhina Mirkhezri; Mohammad Javad Karazifard
Journal:  J Dent (Shiraz)       Date:  2015-09
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.