Literature DB >> 1102669

The provisional fixed partial denture.

D R Federick.   

Abstract

A discussion of the rationale and requirements of the provisional restoration in fixed prosthetic dentistry has been presented. The imporatnce of this phase of restorative densitry and a survey of techniques for making interim restorations were gleaned from a review of the literature. A method for the fabrication of a provisional fixed partial denture using an acrylic resin interocclusal record was described and illustrated.

Mesh：

Year:  1975        PMID： 1102669     DOI： 10.1016/0022-3913(75)90039-6

Source DB:  PubMed          Journal:  J Prosthet Dent        ISSN： 0022-3913            Impact factor:   3.426


  12 in total

Review 1.  Physical and Mechanical Properties of 3D-Printed Provisional Crowns and Fixed Dental Prosthesis Resins Compared to CAD/CAM Milled and Conventional Provisional Resins: A Systematic Review and Meta-Analysis.

Authors:  Saurabh Jain; Mohammed E Sayed; Mallika Shetty; Saeed M Alqahtani; Mohammed Hussain Dafer Al Wadei; Shilpi Gilra Gupta; Ahlam Abdulsalam Ahmed Othman; Abdulkarim Hussain Alshehri; Hatem Alqarni; Abdulaziz Hussain Mobarki; Khalid Motlaq; Haifa F Bakmani; Asma A Zain; Abdullah J Hakami; Moayad F Sheayria
Journal:  Polymers (Basel)       Date:  2022-06-30       Impact factor: 4.967

2.  Comparison of Marginal Accuracy of Interim Restoration Fabricated from Self-cure Composite and Autopolymerizing Acrylic Resin: An In Vitro Study.

Authors:  Sankar Madhavan; Suja M Jude; Sylvana Achammada; Sujana Ullattuthodi; Tessa Kuriachan; Jose Jacob
Journal:  J Pharm Bioallied Sci       Date:  2020-08-28

3.  Assessment of crown and bridge work quality among Sudanese dental practitioners.

Authors:  A B Mohamed; Neamat Hassan Abu-Bakr
Journal:  J Indian Prosthodont Soc       Date:  2010-08-05

4.  An evaluation of fracture resistance of interim fixed partial denture fabricated using polymethylmethacrylate and reinforced by different fibres for its optimal placement: an in vitro study.

Authors:  M Viswambaran; Anita Kapri; Dsj D'Souza; Manjit Kumar
Journal:  Med J Armed Forces India       Date:  2011-10-22

5.  Intrapulpal thermal changes during direct provisionalization using various autopolymerizing resins: Ex-vivo study.

Authors:  Ronauk Singh; Arvind Tripathi; R K Dhiman; Dinesh Kumar
Journal:  Med J Armed Forces India       Date:  2013-07-11

6.  Techniques of fabrication of provisional restoration: an overview.

Authors:  K M Regish; Deeksha Sharma; D R Prithviraj
Journal:  Int J Dent       Date:  2011-10-12

7.  Comparison of fiber reinforcement placed at different locations of pontic in interim fixed partial denture to prevent fracture: An in vitro study.

Authors:  Surg Cdr Anita Kapri
Journal:  J Indian Prosthodont Soc       Date:  2015 Apr-Jun

8.  In vitro comparative evaluation of mechanical properties of temporary restorative materials used in fixed partial denture.

Authors:  D Saisadan; P Manimaran; P K Meenapriya
Journal:  J Pharm Bioallied Sci       Date:  2016-10

9.  Effect of water temperature on the fit of provisional crown margins during polymerization: An in vitro study.

Authors:  Vivekanandan Ramkumar; Arunachalam Sangeetha; Vinaya Kumar
Journal:  J Pharm Bioallied Sci       Date:  2012-08

10.  Effect of polyester fiber reinforcement on the mechanical properties of interim fixed partial dentures.

Authors:  N Gopichander; K V Halini Kumarai; M Vasanthakumar
Journal:  Saudi Dent J       Date:  2015-09-01
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.