Literature DB >> 10989859

Variations in ILMA external diameters: another cause of device failure.

C Preis1, C Czerny, I Preis, M Zimpfer.   

Abstract

PURPOSE: To report failure of insertion of #5 and #4 intubating laryngeal mask airways (ILMAs) in a patient with a mouth opening of just under 25 mm, and the variances among same-size ILMAs. CLINICAL FEATURES: A 53-yr-old man with obstructive sleep apnea underwent elective ENT surgical repair. His mouth opening was just under 25 mm. Ventilation by mask was easy. Direct laryngoscopy failed after induction of anesthesia and neuromuscular block. Neither a #5 nor a #4 ILMA could be passed between the patient's teeth, despite different twisting maneuvres. A #4 LMA was thus prepared as a conduit for fibreoptic intubation. Placement of the LMA was easy, as was fibreoptic-guided intubation. The LMA was removed over the tracheal tube (TT) to enable ENT surgery, and the further course was uneventful. Manual examination showed that, unlike others of the same type, the failed ILMAs were not sufficiently compressible either to allow insertion in this patient or to the 20 mm reported as the maximal outer dimension of the device. Radiological examination revealed that, at the point of the device where it is intended to be compressible, the silicone layer was thicker in the failed devices than in stock compressible ILMAs, and the end of the steel tube was not so sharply beveled.
CONCLUSION: Our inability to insert an ILMA in a patient with an interdental distance of just under 25 mm was because the device was not sufficiently compressible although the manufacturer states the maximal outer dimension to be 20 mm.

Entities:  

Mesh:

Year:  2000        PMID: 10989859     DOI: 10.1007/BF03019669

Source DB:  PubMed          Journal:  Can J Anaesth        ISSN: 0832-610X            Impact factor:   5.063


  1 in total

1.  Air-Q intubating laryngeal airway: A study of the second generation supraglottic airway device.

Authors:  Viren Bhaskar Attarde; Nalini Kotekar; Sarika M Shetty
Journal:  Indian J Anaesth       Date:  2016-05
  1 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.