Literature DB >> 10967193

Factors influencing pulpal response to cavity restorations.

J Camps1, J Déjou, M Rémusat, I About.   

Abstract

OBJECTIVES: The purposes of this retrospective work were: (1) to determine the relative importance of bacteria on cavity walls, remaining dentin thickness and post-operative time on pulpal inflammation after cavity restoration; (2) to compare the respective influences of bacterial microleakage and the restorative material itself on pulp reaction severity.
METHODS: 317 class V cavities, in human bicuspids scheduled for extraction for orthodontic reasons were used for this study. Nine different materials were included. The severity of the pulpal reaction was ranked on hematoxylin/eosin stained sections according to FDI standards. The further parameters recorded were: (1) the presence or absence of bacteria on the cavity walls was noted on Brown and Brenn stained sections; (2) the remaining dentin thickness was measured and the teeth classified into three groups (< 500, 500-1000, > 1000 microns); and (3) the post-operative delay before extraction was recorded and classified as short time (< 5 weeks) or long time (> 5 weeks). Three two-way analyses of variance (ANOVA) followed by Kruskall and Wallis tests evaluated the influence of the three parameters on pulpal reaction severity. The third ANOVA also compared pulpal reactions under the different materials when the teeth were pooled, on bacteria free teeth and on bacteria contaminated teeth.
RESULTS: The first ANOVA ranked by decreasing order of importance: the presence of bacteria (p < 0.0001), the remaining dentin thickness (p = 0.02) and the post-operative delay (p = 0.04). The second ANOVA showed no difference among the restorative materials when bacteria were present on the cavity walls. SIGNIFICANCE: The presence of bacteria on the cavity walls is the main factor influencing pulpal reaction under restorative materials, but does not account for 100% of the cases.

Entities:  

Mesh:

Substances:

Year:  2000        PMID: 10967193     DOI: 10.1016/s0109-5641(00)00041-5

Source DB:  PubMed          Journal:  Dent Mater        ISSN: 0109-5641            Impact factor:   5.304


  14 in total

1.  Tooth substance removal for ceramic single crown materials-an in vitro comparison.

Authors:  Franz Sebastian Schwindling; Moritz Waldecker; Peter Rammelsberg; Stefan Rues; Wolfgang Bömicke
Journal:  Clin Oral Investig       Date:  2018-12-04       Impact factor: 3.573

2.  Mechanical and leakage behaviour of the dentin--adhesive interface.

Authors:  Francesco Mollica; Roberto De Santis; Luigi Ambrosio; Luigi Nicolais; Davide Prisco; Sandro Rengo
Journal:  J Mater Sci Mater Med       Date:  2004-04       Impact factor: 3.896

3.  Short-term treatment outcome of pulpotomies in primary molars using mineral trioxide aggregate and Biodentine: a randomized clinical trial.

Authors:  C Cuadros-Fernández; A I Lorente Rodríguez; S Sáez-Martínez; J García-Binimelis; I About; M Mercadé
Journal:  Clin Oral Investig       Date:  2015-11-18       Impact factor: 3.573

4.  Effect of different adhesive protocols vs calcium hydroxide on primary tooth pulp with different remaining dentin thicknesses:24-month results.

Authors:  Bülent Büyükgüral; Zafer C Cehreli
Journal:  Clin Oral Investig       Date:  2007-09-25       Impact factor: 3.573

Review 5.  [Suggestion for a classification of odontalgias].

Authors:  J C Türp; A Hugger; C Löst; P Nilges; H J Schindler; H J Staehle
Journal:  Schmerz       Date:  2009-10       Impact factor: 1.107

6.  Nondestructive quantification of leakage at the tooth-composite interface and its correlation with material performance parameters.

Authors:  Jirun Sun; Rui Fang; Nancy Lin; Naomi Eidelman; Sheng Lin-Gibson
Journal:  Biomaterials       Date:  2009-06-09       Impact factor: 12.479

7.  3D mapping of polymerization shrinkage using X-ray micro-computed tomography to predict microleakage.

Authors:  Jirun Sun; Naomi Eidelman; Sheng Lin-Gibson
Journal:  Dent Mater       Date:  2008-08-30       Impact factor: 5.304

8.  Chemico-physical and mechanical evaluation of three calcium silicate-based pulp capping materials.

Authors:  Inas M Al-Sherbiny; Mona H Farid; Ashraf M Abu-Seida; Inas T Motawea; Hagar A Bastawy
Journal:  Saudi Dent J       Date:  2020-02-17

9.  Influence of selective immunosuppressive drug regimens on the healing of exposed dogs' dental pulp capped with a recent calcium silicate-based cement.

Authors:  Hanan A Soliman; Radwa Ibrahim El-Toukhy; Mona Mohsen Ebrahim; Mohammed E Grawish; Mohamed Abdel Kader Sobh; Salah Hasab Mahmoud
Journal:  Clin Oral Investig       Date:  2021-08-09       Impact factor: 3.573

Review 10.  Immediate Dentin Sealing: A Literature Review.

Authors:  Theodora-Kalliopi Samartzi; Dimokritos Papalexopoulos; Aspasia Sarafianou; Stefanos Kourtis
Journal:  Clin Cosmet Investig Dent       Date:  2021-06-21
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.