Towards the ultimate minimum particle diameter of silica packings in capillary electrochromatography.

Porous silica beads with an average particle diameter between 0.2 and 3 microm have been applied as packing material in capillary electrochromatography (CEC). The experiments were directed to investigate whether it is really feasible and as promising as expected to use such small particles. In CEC, plate heights of H approximately/= 1-2 d(p) can be achieved which is smaller than the plate heights usually attained in high-performance liquid chromatography. Using a capillary packed with 0.5 microm silica beads we achieved a plate height of H = 3 d(p) indicating the presence of dispersive effects like Joule heating. Calculations demonstrate that at a field strength of about 800 V cm(-1) one third of the plate height can be lost by Joule heating effects if the heat is not removed by a cooling system. Additionally, the H(u) curve is still descending at the maximum electroosmotic flow (EOF) velocity we generated with the modified capillary electrophoresis instrument. To fully exploit the potential of submicron size silicas higher field strengths, i.e., higher EOF velocities, must be attained. To study the influence of the kind of packing on the EOF porous as well as nonporous silicas have been applied. The experiments clearly indicate that the EOF of porous and nonporous silicas is the same. Since the EOF is more or less exclusively generated by the packing material the zeta potential of n-octyl bonded 0.5 microm silica has been determined. The dependence of the zeta potential on the pH is identical to the dependence of the EOF on the pH in a packed capillary. The point of zero charge of the silica is at pH 2-3.