Literature DB >> 10951381

The cytotoxicity of corrosion products of nitinol stent wire on cultured smooth muscle cells.

C C Shih1, S J Lin, Y L Chen, Y Y Su, S T Lai, G J Wu, C F Kwok, K H Chung.   

Abstract

Although nitinol is one of most popular materials of intravascular stents, there are still few confirmative biocompatibility data available, especially in vascular smooth muscle cells. In this report, the nitinol wires were corroded in Dulbecco's modified Eagle's medium with constant electrochemical breakdown voltage and the supernatant and precipitates of corrosion products were prepared as culture media. The dose and time effects of different concentrations of corrosion products on the growth and morphology of smooth muscle cells were evaluated with [(3)H]-thymidine uptake ratio and cell cycle sorter. Both the supernatant and precipitate of the corrosive products of nitinol wire were toxic to the primary cultured rat aortic smooth muscle cells. The growth inhibition was correlated well with the increased concentrations of the corrosion products. Although small stimulation was found with released nickel concentration of 0.95 +/- 0.23 ppm, the growth inhibition became significant when the nickel concentration was above 9 ppm. The corrosion products also altered cell morphology, induced cell necrosis, and decreased cell numbers. The cell replication was inhibited at the G0-G1 to S transition phase. This was the first study to demonstrate the cytotoxicity of corrosion products of current nitinol stent wire on smooth muscle cells, which might affect the postimplantation neointimal hyperplasia and the patency rate of cardiovascular stents. Copyright 2000 John Wiley & Sons, Inc.

Entities:  

Mesh:

Substances:

Year:  2000        PMID: 10951381     DOI: 10.1002/1097-4636(200011)52:2<395::aid-jbm21>3.0.co;2-b

Source DB:  PubMed          Journal:  J Biomed Mater Res        ISSN: 0021-9304


  13 in total

1.  Cytotoxicity of Metal Ions Released from Nitinol Alloys on Endothelial Cells.

Authors:  W Haider; N Munroe; V Tek; P K S Gill; Y Tang; A J McGoron
Journal:  J Mater Eng Perform       Date:  2011-07-01       Impact factor: 1.819

2.  The role of stents in the treatment of congenital heart disease: Current status and future perspectives.

Authors:  Bjoern Peters; Peter Ewert; Felix Berger
Journal:  Ann Pediatr Cardiol       Date:  2009-01

3.  Successful nitinol stent implantation in a large coronary aneurysm: post-interventional patency assessment by magnetic resonance imaging.

Authors:  Frank Breuckmann; Kai Nassenstein; Dirk Boese; Dieter Opherk; Harald H Quick; Jörg Barkhausen; Raimund Erbel
Journal:  Int J Cardiovasc Imaging       Date:  2006-03-04       Impact factor: 2.357

4.  Comparative study of the corrosion behavior of peripheral stents in an accelerated corrosion model: experimental in vitro study of 28 metallic vascular endoprostheses.

Authors:  Karolin J Paprottka; Philipp M Paprottka; Maximilian F Reiser; Tobias Waggershauser
Journal:  Diagn Interv Radiol       Date:  2015 Sep-Oct       Impact factor: 2.630

5.  Pendant allyl crosslinking as a tunable shape memory actuator for vascular applications.

Authors:  Timothy C Boire; Mukesh K Gupta; Angela L Zachman; Sue Hyun Lee; Daniel A Balikov; Kwangho Kim; Leon M Bellan; Hak-Joon Sung
Journal:  Acta Biomater       Date:  2015-06-10       Impact factor: 8.947

6.  Designing Better Cardiovascular Stent Materials - A Learning Curve.

Authors:  Irsalan Cockerill; Carmine Wang See; Marcus L Young; Yadong Wang; Donghui Zhu
Journal:  Adv Funct Mater       Date:  2020-11-04       Impact factor: 18.808

Review 7.  Corrosion degradation and prevention by surface modification of biometallic materials.

Authors:  Raghuvir Singh; Narendra B Dahotre
Journal:  J Mater Sci Mater Med       Date:  2006-12-02       Impact factor: 4.727

8.  Long term follow-up of the endovascular trans-vessel wall technique for parenchymal access in rabbit with full clinical integration.

Authors:  Johan Lundberg; Stefan Jonsson; Staffan Holmin
Journal:  PLoS One       Date:  2011-08-16       Impact factor: 3.240

Review 9.  Biomedical Porous Shape Memory Alloys for Hard-Tissue Replacement Materials.

Authors:  Bin Yuan; Min Zhu; Chi Yuen Chung
Journal:  Materials (Basel)       Date:  2018-09-13       Impact factor: 3.623

10.  A novel mouse model of in situ stenting.

Authors:  Janet Chamberlain; Mark Wheatcroft; Nadine Arnold; Henry Lupton; David C Crossman; Julian Gunn; Sheila Francis
Journal:  Cardiovasc Res       Date:  2010-01-01       Impact factor: 10.787

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.