Effect of diluents on tablet integrity and controlled drug release.

The objective of this study was to evaluate the effect of diluents and wax level on tablet integrity during heat treatment and dissolution for sustained-release formulations and the resultant effect on drug release. Dibasic calcium phosphate dihydrate (DCPD), microcrystalline cellulose (MCC), and lactose were evaluated for their effect on tablet integrity during drug dissolution and heat treatment in wax matrix formulations. A newly developed direct compression diluent, dibasic calcium phosphate anhydrous (DCPA), was also evaluated. Compritol 888 ATO was used as the wax matrix material, with phenylpropanolamine hydrochloride (PPA) as a model drug. Tablets were made by direct compression and then subjected to heat treatment at 80 degrees C for 30 min. The results showed that MCC, lactose, and DCPA could maintain tablets intact during heat treatment above the melting point of wax (70 degrees C-75 degrees C). However, DCPD tablets showed wax egress during the treatment. MCC tablets swelled and cracked during drug dissolution and resulted in quick release. DCPD and lactose tablets remained intact during dissolution and gave slower release than MCC tablets. DCPA tablets without heat treatment disintegrated very quickly and showed immediate release. In contrast, heat-treated DCPA tablets remained intact through the 24-hr dissolution test and only released about 80% PPA at 6 hr. In the investigation of wax level, DCPD was used as the diluent. The drug release rate decreased as the wax content increased from 15% to 81.25%. The dissolution data were best described by the Higuchi square-root-of-time model. Diluents showed various effects during heat treatment and drug dissolution. The integrity of the tablets was related to the drug release rate. Heat treatment retarded drug release if there was no wax egress.