OBJECTIVES: To compare the clinical performance of four commercial ultraviolet light-cured composite materials, and to evaluate curing-system effects on long-term wear resistance of Class I and II restorations. MATERIALS AND METHODS: Approximately 32 samples of each of four different ultraviolet light-cured composites (n = 130) were inserted into conventional Class I and II cavity preparations by two clinicians. Cavosurface margins of the preparations were not beveled. Enamel walls of the preparation were etched, and the respective bonding agent was applied. Each restoration was evaluated by two clinicians at 5, 10, and 17 years. Direct evaluations were performed using modified United States Public Health Service (USPHS) criteria. Indirect evaluations were performed using the Leinfelder cast evaluation method. RESULTS: After 17 years, 65% of the restorations were recalled and pooled direct evaluations were conducted for color matching (94% alfa), marginal discoloration (100% alfa), marginal integrity (100% alfa), secondary caries (92% alfa), surface texture (72% alfa), and anatomic form (22% alfa). Mean occlusal wear from indirect evaluations at 5, 10, and 17 years was 197 +/- 85 microns, 235 +/- 72 microns, and 264 +/- 80 microns, respectively. For direct and indirect evaluations there were significant differences (p < or = .05) between the baseline and 5-year recall evaluations. CLINICAL SIGNIFICANCE: This study demonstrated that the mean pooled occlusal wear of four ultraviolet light-cured posterior composites at 17 years was 264 microns (approximately 0.25 mm), and that most wear (75%) occurred in the first 5 years. Of all recalled restorations, 76% were judged clinically acceptable at 17 years, and 22% of those exhibited no clinically detectable wear.
OBJECTIVES: To compare the clinical performance of four commercial ultraviolet light-cured composite materials, and to evaluate curing-system effects on long-term wear resistance of Class I and II restorations. MATERIALS AND METHODS: Approximately 32 samples of each of four different ultraviolet light-cured composites (n = 130) were inserted into conventional Class I and II cavity preparations by two clinicians. Cavosurface margins of the preparations were not beveled. Enamel walls of the preparation were etched, and the respective bonding agent was applied. Each restoration was evaluated by two clinicians at 5, 10, and 17 years. Direct evaluations were performed using modified United States Public Health Service (USPHS) criteria. Indirect evaluations were performed using the Leinfelder cast evaluation method. RESULTS: After 17 years, 65% of the restorations were recalled and pooled direct evaluations were conducted for color matching (94% alfa), marginal discoloration (100% alfa), marginal integrity (100% alfa), secondary caries (92% alfa), surface texture (72% alfa), and anatomic form (22% alfa). Mean occlusal wear from indirect evaluations at 5, 10, and 17 years was 197 +/- 85 microns, 235 +/- 72 microns, and 264 +/- 80 microns, respectively. For direct and indirect evaluations there were significant differences (p < or = .05) between the baseline and 5-year recall evaluations. CLINICAL SIGNIFICANCE: This study demonstrated that the mean pooled occlusal wear of four ultraviolet light-cured posterior composites at 17 years was 264 microns (approximately 0.25 mm), and that most wear (75%) occurred in the first 5 years. Of all recalled restorations, 76% were judged clinically acceptable at 17 years, and 22% of those exhibited no clinically detectable wear.