Literature DB >> 10825226

Bioactive polymethyl methacrylate-based bone cement: comparison of glass beads, apatite- and wollastonite-containing glass-ceramic, and hydroxyapatite fillers on mechanical and biological properties.

S Shinzato1, M Kobayashi, W F Mousa, M Kamimura, M Neo, Y Kitamura, T Kokubo, T Nakamura.   

Abstract

A new bioactive bone cement (designated GBC) consisting of polymethyl methacrylate (PMMA) as an organic matrix and bioactive glass beads as an inorganic filler has been developed. The bioactive beads, consisting of MgO-CaO-SiO(2)-P(2)O(5)-CaF(2) glass, have been newly designed, and a novel PMMA powder was selected. The purpose of the present study was to compare this new bone cement GBC's mechanical properties in vitro and its osteoconductivity in vivo with cements consisting of the same matrix as GBC and either apatite- and wollastonite-containing glass-ceramic (AW-GC) powder (designated AWC) or sintered hydroxyapatite (HA) powder (HAC). Each filler added to the cements amounted to 70 wt %. The bending strength of GBC was significantly higher than that of AWC and HAC (p < 0.0001). Cements were packed into intramedullar canals of rat tibiae in order to evaluate osteoconductivity as determined by an affinity index. Rats were sacrificed at 2, 4, and 8 weeks after operation. An affinity index, which equaled the length of bone in direct contact with the cement expressed as a percentage of the total length of the cement surface, was calculated for each cement. At each time interval studied, GBC showed a significantly higher affinity index than AWC or HAC up to 8 weeks after implantation (p < 0.03). The value for GBC increased significantly with time up to 8 weeks (p < 0.006). The handling property of GBC was comparable with that of PMMA bone cement. Our study revealed that the higher osteoconductivity of GBC was due to the higher bioactivity of the bioactive glass beads at the cement surface and the lower solubility of the new PMMA powder to MMA monomer. In addition, it was found that the smaller spherical shape and glassy phase of the glass beads gave GBC strong enough mechanical properties to be useful under weight-bearing conditions. GBC shows promise as an alternative with improved properties to the conventionally used PMMA bone cement. Copyright 2000 John Wiley & Sons, Inc.

Entities:  

Mesh:

Substances:

Year:  2000        PMID: 10825226     DOI: 10.1002/(sici)1097-4636(200008)51:2<258::aid-jbm15>3.0.co;2-s

Source DB:  PubMed          Journal:  J Biomed Mater Res        ISSN: 0021-9304


  18 in total

1.  Bioglass as a carrier for reindeer bone protein extract in the healing of rat femur defect.

Authors:  Hanna Tölli; Sauli Kujala; Katri Levonen; Timo Jämsä; Pekka Jalovaara
Journal:  J Mater Sci Mater Med       Date:  2010-02-17       Impact factor: 3.896

2.  Synthesis of bioactive PMMA bone cement via modification with methacryloxypropyltri-methoxysilane and calcium acetate.

Authors:  A Mori; C Ohtsuki; T Miyazaki; A Sugino; M Tanihara; K Kuramoto; A Osaka
Journal:  J Mater Sci Mater Med       Date:  2005-08       Impact factor: 3.896

Review 3.  Bioactive ceramic-based materials with designed reactivity for bone tissue regeneration.

Authors:  Chikara Ohtsuki; Masanobu Kamitakahara; Toshiki Miyazaki
Journal:  J R Soc Interface       Date:  2009-01-20       Impact factor: 4.118

4.  Static and fatigue mechanical characterizations of variable diameter fibers reinforced bone cement.

Authors:  Yan Zhou; Weimin Yue; Chaodi Li; James J Mason
Journal:  J Mater Sci Mater Med       Date:  2008-10-21       Impact factor: 3.896

5.  Self-setting calcium orthophosphate formulations.

Authors:  Sergey V Dorozhkin
Journal:  J Funct Biomater       Date:  2013-11-12

6.  Improved mechanical properties of acrylic bone cement with short titanium fiber reinforcement.

Authors:  S P Kotha; C Li; P McGinn; S R Schmid; J J Mason
Journal:  J Mater Sci Mater Med       Date:  2006-08       Impact factor: 3.896

7.  Improved mechanical properties of acrylic bone cement with short titanium fiber reinforcement.

Authors:  S P Kotha; C Li; P McGinn; S R Schmid; J J Mason
Journal:  J Mater Sci Mater Med       Date:  2006-12       Impact factor: 3.896

8.  The influence of lithium fluoride on in vitro biocompatibility and bioactivity of calcium aluminate-pMMA composite cement.

Authors:  S H Oh; S Y Choi; S H Choi; Y K Lee; K N Kim
Journal:  J Mater Sci Mater Med       Date:  2004-01       Impact factor: 3.896

9.  Injectable acrylic bone cements for vertebroplasty based on a radiopaque hydroxyapatite. Formulation and rheological behaviour.

Authors:  L Hernández; M Gurruchaga; I Goñi
Journal:  J Mater Sci Mater Med       Date:  2008-08-14       Impact factor: 3.896

10.  Development of bioactive PMMA-based cement by modification with alkoxysilane and calcium salt.

Authors:  C Ohtsuki; T Miyazaki; M Kyomoto; M Tanihara; A Osaka
Journal:  J Mater Sci Mater Med       Date:  2001 Oct-Dec       Impact factor: 3.896

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.