Comparison of seed loading approaches in prostate brachytherapy.

Since uniform seed loading in prostate brachytherapy can produce an intolerably high dose along the urethra, some form of peripheral loading is commonly employed. We define three variants of peripheral loading and compare them in a small, medium, and large prostate in terms of coverage of the planning target volume (PTV), homogeneity, and ability to spare critical structures of excessive dose. Modified uniform loading has at least 2/3 of the seeds occupying sites on a 1 cm cubic grid keyed to the prostate base and the posterior border of the prostate. Nonuniform loading explicitly spares the urethra by using only basal and apical seeds in at least two centrally located needles. Peripheral loading uses higher activity seeds with the posterior implant plane 5 mm anterior to the posterior border of the prostate. The three prostate volumes (18.7, 40.7, and 60.2 cm3 by ultrasound) were expanded to planning volumes (32.9, 60.0, and 87.8 cm3, respectively). The planning volumes (PTVs) were loaded with a 125I seed distribution and activity sufficient to cover 99.7+/-0.3% of the PTV with the prescribed minimal peripheral dose (mPD) of 145 Gy. Activities used ranged from 0.32 to 0.37 mCi/seed (0.41-0.47 U/seed) for the first two approaches and from 0.57 to 0.66 mCi (0.72-0.84 U) for peripheral loading. Modified uniform loading produced the most uniform distribution based on dose-volume histograms and the volume receiving >150% of prescribed dose. All the approaches are capable of constraining the superior-inferior dose profile (the urethral path) to less than 150% of the mPD, but the nonuniform approach with explicit urethral sparing kept the urethral dose below 120% of the mPD. Dose profiles for the three approaches along the posterior-anterior midline axis are comparable near the urethra, but peripheral and nonuniform approaches have extended regions where the dose is >150% of mPD. These regions approach within 10 mm of the rectum or urethra, so these two approaches require greater accuracy in intraoperative execution of the plan. Although each of the three planning approaches can achieve the treatment goals of adequate coverage and critical structure sparing, modified uniform loading has a more homogeneous dose distribution. This approach may be more forgiving of systematic errors in seed placement.