The new design of an infrared-controlled human-computer interface for the disabled.

This paper reports on the development of an eyeglass- type infrared (IR)-controlled computer interface for the disabled. This system may serve to assist those who suffer from spinal cord injuries or other handicaps to operate a computer. This system is comprised of three major components: 1) an infrared transmitting module, 2) an infrared receiving/signal-processing module, and 3) a main controller, the Intel-8951 microprocessor. The infrared transmitting module utilizes tongue-touch circuitry which is converted to an infrared beam and a low power laser (<0.1 mW) beam. The infrared receiving/signal-processing module, receives the infrared beam and fine tunes the unstable infrared beam into standard pulses which are used as control signals. The main controller is responsible for detecting the input signals from the infrared receiving/signal-processing module and verifying these signals with the mapping table in its memory. After the signal is verified, it is released to control the keys of the computer keyboard and mouse interface. This design concept was mainly based on the idea that the use of an infrared remote module fastened to the eyeglasses could allow the convenient control of the input motion on the keys of a computer keyboard and mouse which are all modified with infrared receiving/signal-processing modules. The system is designed for individuals with spinal cord injuries and disabled in which the subjects' movement are severely restricted. The infrared transmitting module can be easily mounted on eyeglasses or artificial limbs.