Literature DB >> 10551103

Development of a new photoinitiation system for dental light-cure composite resins.

Y J Park1, K H Chae, H R Rawls.   

Abstract

OBJECTIVES: The purpose of this study is to explore the synergistic effect of combining camphorquinone (CQ) with 1-phenyl-1,2-propanedione (PPD) as a new photoinitiator.
METHODS: A BisGMA, UDMA, TEGDMA monomer mixture was made light-curing with CQ and/or PPD plus 0.2 wt.% N,N-cyanoethyl-methylaniline (CEMA). Seventeen groups, three specimens each, were tested in which the concentrations of PPD and CQ were varied. The effect of photosensitizer type (CQ or PPD) and ratio (PPD/CQ) on degree of conversion (DC) was investigated using FTIR spectrophotometry. The results were analyzed by ANOVA and Student-Newman-Keuls' multiple range comparison. The absorption spectra of PPD and CQ were recorded by UV-Vis spectrophotometry. A blind color comparison of specimens containing combinations of the two photosensitizers was also undertaken.
RESULTS: Alone, PPD induces a DC which is not significantly different from that of CQ alone. In combination, CQ + PPD produces a DC that generally exceeds that produced by the same concentration of either used alone. The maximum DC occurs between PPD/CQ = 1:1 and 1:4. At total photosensitizer concentrations above 1.8 wt.%, DC is increased by PPD but depressed by CQ, which is evidence that different mechanisms are involved. PPD (lambda max approximately 410 nm) and CQ (lambda max approximately 468 nm) have different wavelength absorption ranges, resulting in a perceptibly lighter shade of yellow for PPD. SIGNIFICANCE: 1-phenyl-1,2-propanedione is a photosensitizer of potential value in reducing color problems associated with visible light cured dental resins. In combination with camphorquinone, it acts synergistically to produce a more efficient photoinitiation reaction.

Entities:  

Mesh:

Substances:

Year:  1999        PMID: 10551103     DOI: 10.1016/s0109-5641(99)00021-4

Source DB:  PubMed          Journal:  Dent Mater        ISSN: 0109-5641            Impact factor:   5.304


  20 in total

1.  Spectrophotometric and colorimetric evaluation of staining of the light cured composite after exposure with different intensities of light curing units.

Authors:  Veeramachaneni Chandrasekhar; L Pramod Reddy; T Jaya Prakash; G Anitha Rao; M Pradeep
Journal:  J Conserv Dent       Date:  2011-10

2.  Evaluation of the curing depth of two translucent composite materials using a halogen and two LED curing units.

Authors:  Olga Polydorou; Alexandros Manolakis; Elmar Hellwig; Petra Hahn
Journal:  Clin Oral Investig       Date:  2007-10-25       Impact factor: 3.573

3.  Curing effectiveness of single-peak and multi-peak led light curing units on tpo-containing resin composites with different chromatic characteristics.

Authors:  G Conte; M Panetta; M Mancini; A Fabianelli; A Brotzu; R Sorge; L Cianconi
Journal:  Oral Implantol (Rome)       Date:  2017-09-27

4.  Synthesis and application of triclosan methacrylate monomer in resin composites.

Authors:  Andreia Bolzan de Paula; Jesus Roberto Taparelli; Roberta Caroline Bruschi Alonso; Lúcia Helena Innocentini-Mei; Regina M Puppin-Rontani
Journal:  Clin Oral Investig       Date:  2018-06-18       Impact factor: 3.573

5.  Oxidative stress is responsible for genotoxicity of camphorquinone in primary human gingival fibroblasts.

Authors:  Miriam Wessels; Gabriele Leyhausen; Joachim Volk; Werner Geurtsen
Journal:  Clin Oral Investig       Date:  2014-01-16       Impact factor: 3.573

6.  Improving fracture toughness of dental nanocomposites by interface engineering and micromechanics.

Authors:  K S Chan; Y-D Lee; D P Nicolella; B R Furman; S Wellinghoff; H R Rawls
Journal:  Eng Fract Mech       Date:  2007-08       Impact factor: 4.406

7.  Colour stability of veneering composites after accelerated aging.

Authors:  Triantafillos Papadopoulos; Aspasia Sarafianou; Andreas Hatzikyriakos
Journal:  Eur J Dent       Date:  2010-04

8.  Effect of exposure time on the color stability of resin-based restorative materials when polymerized with quartz-tungsten halogen and LED light.

Authors:  Stefan Rüttermann; Kim Suyoun; Wolfgang H-M Raab; Ralf Janda
Journal:  Clin Oral Investig       Date:  2009-07-21       Impact factor: 3.573

9.  Degree of conversion and color stability of the light curing resin with new photoinitiator systems.

Authors:  Dong-Hoon Shin; H Ralph Rawls
Journal:  Dent Mater       Date:  2009-04-15       Impact factor: 5.304

10.  Effect of combining photoinitiators on cure efficiency of dental resin-based composites.

Authors:  Lucas Lara; Mateus Garcia Rocha; Livia Rodrigues de Menezes; Américo Bortolazzo Correr; Mario Alexandre Coelho Sinhoreti; Dayane Oliveira
Journal:  J Appl Oral Sci       Date:  2021-07-23       Impact factor: 2.698

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.